Carr Lane Round Grippers

New

Round Grippers are replaceable inserts that provide additional holding force and/or wear resistance when installed in a fixture

More details

Carr Lane Round Grippers

Serrated grippers recessed into a fixture's locating surfaces dramatically increases resistance to movement by embedding themselves in a workpiece. Round Grippers can be fastened from behind with a Socket-Head Cap Screw. Some gripper types also have an O.D. locking flat for fastening with a set screw. Counterbored Round Grippers are ideal for blind-hole installation and surface mounting, again fasten with a Socket-Head Cap Screw.

Options:

  • Thread: #8-32 - 1/4-28 or M5 - M6
  • Metric and Imperial sizes

Serrated - designed to slightly penetrate the workpiece in order to increase grip force. Hardened version is most economical and impact resistant. Carbide-Tipped is still economical, impact resistant, extra durability. Solid-Carbide is most durable.

Flat grippers - can be used to provide additional wear resistance, or as precision rest pads. The carbide-tipped version is the most durable. The hardened-steel version is the most economical and impact resistant. The hardened-stainlesssteel version provides high strength and excellent corrosion resistance. The Delrin version helps avoid marring finished workpieces.

Abrasive Diamond - abrasive diamond surface permanently fused to a hardened stainless steel pad. The surface provides significant holding force with relatively low clamping pressure and minimal surface marring, also offers great wear resistance due to the diamond-particle surface.

Bonded-Urethane - urethane surface permanently bonded to a stainless steel pad, with non-marking and non-staining it provides brilliant protection against damage. It's bubbled texture gives firm gripping yet allows air to escape so that no suction is created under load, and also provides excellent wear resistance and is available in three firmnesses.

Counterbored Round Grippers - are ideal for blindhole installation and surface mounting, fasten with a standard socket-head cap screw. The serrated version, made of hardened tool steel, is designed to slightly penetrate the workpiece to significantly increase gripping force. The abrasive diamond version has an abrasive-diamond surface permanently fused to a hardened stainless steel pad.
This abrasive surface, comparable to a 100- grit abrasive, provides significant holding force with relatively low clamping pressure and minimal surface marring. This diamond-particle surface also offers excellent wear resistance.


Domestic and export sales enquiries are welcome from end users, original equipment machinery manufacturers and trade suppliers from all industrial sectors.
If you can’t find what you are looking for, need product pricing, delivery, technical support or associated services CONTACT HYQUIP or call our sales office +44 (0)1204 699959

PART NUMBER METRIC OR IMPERIAL EXTERNAL DIAMETER GRIPPER TYPE PRICE ADD TO MY PARTS LIST
CLM-10-RG Metric 10mm Hardened Tool Steel (Serrated) £ 7.68 ADD
CLM-10-RGT Metric 10mm Carbide Tipped (Serrated) £ 8.04 ADD
CLM-10-RGD Metric 10mm Abrasive Diamond £ 7.71 ADD
CLM-10-RGU-1 Metric 10mm Bonded Urethane Yellow £ 7.53 ADD
CLM-10-RGU-2 Metric 10mm Bonded Urethane Blue £ 7.53 ADD
CLM-10-RGU-3 Metric 10mm Bonded Urethane Red £ 7.53 ADD
CLM-12-RG Metric 12mm Hardened Tool Steel (Serrated) £ 7.94 ADD
CLM-12-RGT Metric 12mm Carbide Tipped (Serrated) £ 7.51 ADD
CLM-12-RGD Metric 12mm Abrasive Diamond £ 8.84 ADD
CLM-12-RGU-1 Metric 12mm Bonded Urethane Yellow £ 8.26 ADD
CLM-12-RGU-2 Metric 12mm Bonded Urethane Blue £ 8.26 ADD
CLM-12-RGU-3 Metric 12mm Bonded Urethane Red £ 8.26 ADD
CLM-16-RG Metric 16mm Hardened Tool Steel (Serrated) £ 10.92 ADD
CLM-16-RGT Metric 16mm Carbide Tipped (Serrated) £ 8.17 ADD
CLM-16-RGD Metric 16mm Abrasive Diamond £ 11.15 ADD
CLM-16-RGU-1 Metric 16mm Bonded Urethane Yellow £ 10.10 ADD
CLM-16-RGU-2 Metric 16mm Bonded Urethane Blue £ 10.10 ADD
CLM-16-RGU-3 Metric 16mm Bonded Urethane Red £ 10.10 ADD
CLM-20-RG Metric 20mm Hardened Tool Steel (Serrated) £ 12.10 ADD
CLM-20-RGT Metric 20mm Carbide Tipped (Serrated) £ 10.58 ADD
CLM-20-RGD Metric 20mm Abrasive Diamond £ 12.46 ADD
CLM-20-RGU-1 Metric 20mm Bonded Urethane Yellow £ 11.72 ADD
CLM-20-RGU-2 Metric 20mm Bonded Urethane Blue £ 11.72 ADD
CLM-20-RGU-3 Metric 20mm Bonded Urethane Red £ 11.72 ADD
CLM-25-RG Metric 25mm Hardened Tool Steel (Serrated) £ 14.70 ADD
CLM-25-RGT Metric 25mm Carbide Tipped (Serrated) £ 17.16 ADD
CLM-25-RGD Metric 25mm Abrasive Diamond £ 14.55 ADD
CLM-25-RGU-1 Metric 25mm Bonded Urethane Yellow £ 13.39 ADD
CLM-25-RGU-2 Metric 25mm Bonded Urethane Blue £ 13.39 ADD
CLM-25-RGU-3 Metric 25mm Bonded Urethane Red £ 13.39 ADD
CLM-10-RGF Metric 10mm Hardened Steel (Flat) £ 4.99 ADD
CLM-10-RGF-S Metric 10mm Hardened Stainless (Flat) £ 5.54 ADD
CLM-10-RGFN Metric 10mm Delrin (Flat) £ 4.67 ADD
CLM-12-RGF Metric 12mm Hardened Steel (Flat) £ 5.25 ADD
CLM-12-RGF-S Metric 12mm Hardened Stainless (Flat) £ 5.87 ADD
CLM-12-RGFN Metric 12mm Delrin (Flat) £ 4.92 ADD
CLM-16-RGF Metric 16mm Hardened Steel (Flat) £ 5.71 ADD
CLM-16-RGF-S Metric 16mm Hardened Stainless (Flat) £ 6.45 ADD
CLM-16-RGFN Metric 16mm Delrin (Flat) £ 5.44 ADD
CLM-20-RGF Metric 20mm Hardened Steel (Flat) £ 6.29 ADD
CLM-20-RGF-S Metric 20mm Hardened Stainless (Flat) £ 7.17 ADD
CLM-20-RGFN Metric 20mm Delrin (Flat) £ 6.05 ADD
CLM-25-RGF Metric 25mm Hardened Steel (Flat) £ 6.64 ADD
CLM-25-RGF-S Metric 25mm Hardened Stainless (Flat) £ 7.69 ADD
CLM-25-RGFN Metric 25mm Delrin (Flat) £ 6.38 ADD
CL-4-RG Imperial 1/4 Hardened Tool Steel (Serrated) £ 7.15 ADD
CL-6-RG Imperial 3/8 Hardened Tool Steel (Serrated) £ 7.04 ADD
CL-6-RGT Imperial 3/8 Carbide Tipped (Serrated) £ 7.53 ADD
CL-6-RGD Imperial 3/8 Abrasive Diamond £ 7.42 ADD
CL-8-RG Imperial 1/2 Hardened Tool Steel (Serrated) £ 7.35 ADD
CL-8-RGT Imperial 1/2 Carbide Tipped (Serrated) £ 7.17 ADD
CL-8-RGC Imperial 1/2 Solid Carbide (Serrated) £ 12.21 ADD
CL-8-RGD Imperial 1/2 Abrasive Diamond £ 7.78 ADD
CL-10-RG Imperial 5/8 Hardened Tool Steel (Serrated) £ 10.02 ADD
CL-10-RGT Imperial 5/8 Carbide Tipped (Serrated) £ 8.66 ADD
CL-10-RGC Imperial 5/8 Solid Carbide (Serrated) £ 17.58 ADD
CL-10-RGD Imperial 5/8 Abrasive Diamond £ 10.31 ADD
CL-12-RG Imperial 3/4 Hardened Tool Steel (Serrated) £ 11.06 ADD
CL-12-RGT Imperial 3/4 Carbide Tipped (Serrated) £ 10.21 ADD
CL-12-RGC Imperial 3/4 Solid Carbide (Serrated) £ 21.65 ADD
CL-12-RGD Imperial 3/4 Abrasive Diamond £ 11.05 ADD
CL-16-RG Imperial 1 Hardened Tool Steel (Serrated) £ 13.39 ADD
CL-16-RGT Imperial 1 Carbide Tipped (Serrated) £ 17.21 ADD
CL-16-RGD Imperial 1 Abrasive Diamond £ 13.55 ADD
CL-6-RGF Imperial 3/8 Hardened Steel (Flat) £ 4.71 ADD
CL-6-RGF-S Imperial 3/8 Hardened Stainless (Flat) £ 5.24 ADD
CL-6-RGFN Imperial 3/8 Delrin (Flat) £ 4.38 ADD
CL-6-RGU-1 Imperial 3/8 Bonded Urethane Yellow £ 6.97 ADD
CL-6-RGU-2 Imperial 3/8 Bonded Urethane Blue £ 6.97 ADD
CL-6-RGU-3 Imperial 3/8 Bonded Urethane Red £ 6.97 ADD
CL-8-RGF Imperial 1/2 Hardened Steel (Flat) £ 4.99 ADD
CL-8-RGF-S Imperial 1/2 Hardened Stainless (Flat) £ 5.59 ADD
CL-8-RGFN Imperial 1/2 Delrin (Flat) £ 4.65 ADD
CL-8-RGU-1 Imperial 1/2 Bonded Urethane Yellow £ 7.61 ADD
CL-8-RGU-2 Imperial 1/2 Bonded Urethane Blue £ 7.61 ADD
CL-8-RGU-3 Imperial 1/2 Bonded Urethane Red £ 7.61 ADD
CL-10-RGF Imperial 5/8 Hardened Steel (Flat) £ 5.40 ADD
CL-10-RGF-S Imperial 5/8 Hardened Stainless (Flat) £ 6.09 ADD
CL-10-RGFN Imperial 5/8 Delrin (Flat) £ 5.12 ADD
CL-10-RGU-1 Imperial 5/8 Bonded Urethane Yellow £ 9.56 ADD
CL-10-RGU-2 Imperial 5/8 Bonded Urethane Blue £ 9.56 ADD
CL-10-RGU-3 Imperial 5/8 Bonded Urethane Red £ 9.56 ADD
CL-12-RGF Imperial 3/4 Hardened Steel (Flat) £ 5.95 ADD
CL-12-RGF-S Imperial 3/4 Hardened Stainless (Flat) £ 6.77 ADD
CL-12-RGFN Imperial 3/4 Delrin (Flat) £ 5.67 ADD
CL-12-RGU-1 Imperial 3/4 Bonded Urethane Yellow £ 10.64 ADD
CL-12-RGU-2 Imperial 3/4 Bonded Urethane Blue £ 10.64 ADD
CL-12-RGU-3 Imperial 3/4 Bonded Urethane Red £ 10.64 ADD
CL-16-RGF Imperial 1 Hardened Steel (Flat) £ 6.28 ADD
CL-16-RGF-S Imperial 1 Hardened Stainless (Flat) £ 7.30 ADD
CL-16-RGFN Imperial 1 Delrin (Flat) £ 6.01 ADD
CL-16-RGU-1 Imperial 1 Bonded Urethane Yellow £ 13.32 ADD
CL-16-RGU-2 Imperial 1 Bonded Urethane Blue £ 13.32 ADD
CL-16-RGU-3 Imperial 1 Bonded Urethane Red £ 13.32 ADD
CLM-12-RGB Metric 3/4 Hardened Tool Steel (Serrated, Counterbored) £ 8.34 ADD
CLM-12-RGBD Metric 3/4 Diamond Abrasive (Counterbored) £ 9.12 ADD
CLM-16-RGB Metric 1 Hardened Tool Steel (Serrated, Counterbored) £ 11.47 ADD
CLM-16-RGBD Metric 1 Diamond Abrasive (Counterbored) £ 11.95 ADD
CLM-20-RGB Metric 1 Hardened Tool Steel (Serrated, Counterbored) £ 13.09 ADD
CLM-20-RGBD Metric 1 Diamond Abrasive (Counterbored) £ 13.53 ADD
CLM-25-RGB Metric 1 Hardened Tool Steel (Serrated, Counterbored) £ 15.84 ADD
CLM-25-RGBD Metric 1 Diamond Abrasive (Counterbored) £ 16.37 ADD
CL-8-RGB Imperial 1/2 Hardened Tool Steel (Serrated, Counterbored) £ 7.54 ADD
CL-8-RGBD Imperial 1/2 Diamond Abrasive (Counterbored) £ 7.77 ADD
CL-10-RGB Imperial 5/8 Hardened Tool Steel (Serrated, Counterbored) £ 10.33 ADD
CL-10-RGBD Imperial 5/8 Diamond Abrasive (Counterbored) £ 10.80 ADD
CL-12-RGB Imperial 3/4 Hardened Tool Steel (Serrated, Counterbored) £ 11.90 ADD
CL-12-RGBD Imperial 3/4 Diamond Abrasive (Counterbored) £ 12.14 ADD
CL-16-RGB Imperial 1 Hardened Tool Steel (Serrated, Counterbored) £ 14.30 ADD
CL-16-RGBD Imperial 1 Diamond Abrasive (Counterbored) £ 14.37 ADD
CL-6-RGFT Imperial 3/8 Carbide Tipped (Flat) £ 9.25 ADD
CL-8-RGFT Imperial 1/2 Carbide Tipped (Flat) £ 9.41 ADD
CL-10-RGFT Imperial 5/8 Carbide Tipped (Flat) £ 9.95 ADD
CL-12-RGFT Imperial 3/4 Carbide Tipped (Flat) £ 11.57 ADD
CL-16-RGFT Imperial 1 Carbide Tipped (Flat) £ 19.01 ADD

IMPERIAL

PART NO.
HARDENED
TOOL STEEL
(SERRATED)

PART NO. CARBIDE
TIPPED (SERRATED)

PART NO.
SOLID CARBIDE (SERRATED)

PART NO. ABRASIVE DIAMOND

A
DIA

B

C

D

E

F

G DIA

SERRATIONS

PART NO. BONDED URETHANE

URETHANE

B

D

G DIA

CL-4-RG

1/4

3/8

#8-32

 

 

3/16

Extra
Fine

.094x90º

CL-6-RG

CL-6-RGT

CL-6-RGD

3/8

#10-32

3/16

11/64

5/16

CL-6-RGU-1*

 

 

1/2

1/4

.39

CL-8-RG

CL-8-RGT

CL-8-RGC

CL-8-RGD

1/2

3/8

Fine

.125x90º

CL-8-RGU-1*

.51

CL-10-RG

CL-10-RGT

CL-10-RGC

CL-10-RGD

5/8

1/4-28

1/2

CL-10-RGU-1*

 

3/8

.63

CL-12-RG

CL-12-RGT

CL-12-RGC

CL-12-RGD

3/4

5/8

CL-12-RGU-1*

.83

CL-16-RG

CL-16-RGT

CL-16-RGD

1

3/4

CL-16-RGU-1*

1.06

METRIC

CLM-10-RG

CLM-10-RGT

CLM-10-RGD

.394 (10mm)

 

.3937 (10mm)

M5

.18

.185

.177

Extra Fine

 

CLM-10-RGU-1*

 

.472 (12mm)

.24

.39

CLM-12-RG

CLM-12-RGT

CLM-12-RGD

.472 (12mm)

Fine

.094x90º

CLM-12-RGU-1*

.51

CLM-16-RG

CLM-16-RGT

CLM-16-RGD

.630 (16mm)

M6

.125x90º

CLM-16-RGU-1*

.37

.63

CLM-20-RG

CLM-20-RGT

CLM-20-RGD

.787 (20mm)

 

CLM-20-RGU-1*

.83

CLM-25-RG

CLM-25-RGT

CLM-25-RGD

.984 (25mm)

 

CLM-25-RGU-1*

1.06

* -1=35 Durometer,-2=60 Durometer,-3=80 Durometer

IMPERIAL

PART NO.
CARBIDE
TIPPED (FLAT)

PART NO.
HARDENED
STEEL (FLAT)

PART NO.
HARDENED
STAINLESS (FLAT)

PART NO.
DELRIN
(FLAT)

A
DIA

B

C

D

E

F

G
DIA

CL-6-RGFT

CL-6-RGF

CL-6-RGF-S

CL-6-RGFN

3/8

3/8

#10-32

3/8

3/16

11/64

5/16

CL-8-RGFT

CL-8-RGF

CL-8-RGF-S

CL-8-RGFN

1/2

3/8

CL-10-RGFT

CL-10-RGF

CL-10-RGF-S

CL-10-RGFN

5/8

1/4-28

1/2

CL-12-RGFT

CL-12-RGF

CL-12-RGF-S

CL-12-RGFN

3/4

5/8

CL-16-RGFT

CL-16-RGF

CL-16-RGF-S

CL-16-RGFN

1

3/4

METRIC

CLM-10-RGF

CLM-10-RGF-S

CLM-10-RGFN

.394 (10mm)

.3937 (10mm)

M5

.18

.185

.177

CLM-12-RGF

CLM-12-RGF-S

CLM-12-RGFN

.472 (12mm)

CLM-16-RGF

CLM-16-RGF-S

CLM-16-RGFN

.630 (16mm)

M6

CLM-20-RGF

CLM-20-RGF-S

CLM-20-RGFN

.787 (20mm)

CLM-25-RGF

CLM-25-RGF-S

CLM-25-RGFN

.984 (25mm)

 

IMPERIAL

PARTNO.
HARDENED
TOOL STEEL
(SERRATED)

PART NO.
DIAMOND

ABRASIVE

A
DIA

B

C

SERRATIONS
(HARDENED
TOOL STEEL
VERSION)

CL-8-RGB

CL-8-RGBD

1/2

3/8

#8

Fine

.125x90º

CL-10-RGB

CL-10-RGBD

5/8

CL-12-RGB

CL-12-RGBD

3/4

1/2

#10

CL-16-RGB

CL-16-RGBD

1

1/4
 

METRIC

CLM-12-RGB

CLM-12-RGBD

.472(12mm)

.394 (10mm)

M4

Fine

.125x90º

CLM-16-RGB

CLM-16-RGBD

.630(16mm)

CLM-20-RGB

CLM-20-RGBD

.787(20mm)

.472 (12mm)

M5

CLM-25-RGB

CLM-25-RGBD

.984(25mm)

M6


 

send a message

 

30 other products in the same category: