As a distributor for Worldwide brands such as Carr Lane, Bosch Rexroth and Enerpac, HYQUIP aim to showcase all prodcuts and ranges, including new products as soon as they hit the market. See below for the latest products from our manufacturers.
HC6H: 8 intensification factor
HC62 versions: 9 different intensification factors
HC63 versions: 9 different intensification factors
HC62-013: 9 different intensification factors
HC63-013: 9 different intensification factors
ROEMHELD B1.450 Hydraulic Threaded Body Cylinders
These hydraulic cylinders are threaded directly into the tapped holes of a clamping fixture. They are a compact solution and can be used to great advantage in fixtures where space is at a premium. Hydraulic fluid is supplied through passageways drilled into the fixture body, this reducing the use of hydraulic pipework, fittings and hoses. The built-in spring returns the piston when hydraulic pressure is released. The female threads at the piston rod end is designed to accept a contact bolt.
See datasheet G 3.800 for contact bolts.
ROEMHELD B1.4301 Threaded-Body Cylinders
These hydraulic cylinders are threaded directly into tapped holes of a clamping fixture. These are a compact solution and can be used to great advantage in fixtures where space is at a premium. Hydraulic fluid is supplied through passageways drilled into the fixture body, this reducing the use of hydraulic pipework, fittings and hoses. The built-in spring returns the piston when hydraulic pressure is released.
ROEMHELD B1.460 Threaded Body Cylinder: single acting with spring return
These threaded-body cylinders can be threaded directly into tapped holes in the fixture down to the hex-section of the cylinder body. Spacings between cylinders can be minimised when cylinders are arranged in a row, since the oil is fed through drilled passages in the fixture. Sealing is made with the supplied sealing ring at the bottom of the location hole. A long piston guide in combination with an O-ring/back-ring seal provides trouble-free operation.
ROEMHELD B1.461 Threaded Body Cylinder: single acting with spring return and double wiper
These threaded-body cylinders can be threaded directly into tapped holes in the fixture down to the hex-section of the cylinder body. Spacings between cylinders can be minimised when cylinders are arranged in a row, since the oil is fed through drilled passages in the fixture.
Wagon Brakes with glow in the dark handle, for use on stage-set designs and other mobile jigs and carts, available in two sizes
Precisley-ground screws, used for locating and clamping or clamping only, by selecting the appropriate screw length
Similar to a standard Jig Pin, except that the pin body is positively retained in a locking bushing
