Carr Lane Pivoting Hoist Rings

New

Economical hoist ring with a low profile and high load capacity with forged bas and solid-loop forged ring that pivots a full 180º

  • Load rating (lbs): 900kg to 9,100kg
  • Thread x minimum length: M8 x 25mm to M16 x 65mm
  • Base: Forged 1045 steel, black oxide finish
  • Safety factor = 5:1.

More details

Download Data Sheet Pivoting Hoist Rings

Carr Lane Pivoting Hoist Rings

  • Load rating (lbs): 900kg to 9,100kg
  • Thread x minimum length: M8 x 25mm to M16 x 65mm
  • Ring: Forged 4130 steel black oxide finish 100% magnaflux inspected PER ASTM E-1444
  • Base: Forged 1045 steel, black oxide finish
  • Safety factor = 5:1.

Economical hoist ring with a low profile and high load capacity. Forged base and solid-loop forged ring pivots a full 180 degrees, but does not rotate. Available in heat treated Steel with Black Oxide Finish.

Installation:

Fasten with grade-8 socket-head cap screws, using the installation torque specified in the dimension table. The smallest three sizes have two mounting holes, the largest two sizes have four. Since these hoist rings do not rotate, install so that lifting force is applied in the pivoting direction.


Domestic and export sales enquiries are welcome from end users, original equipment machinery manufacturers and trade suppliers from all industrial sectors. If you can’t find what you are looking for, need product pricing, delivery, technical support or associated services CONTACT HYQUIP or call our sales office +44 (0)1204 699959

PART NUMBER LOAD RATING (KG) PRICE inc. VAT PRICE exc. VAT ADD TO MY PARTS LIST
CL-20-HR CL20HR 900 kg £ 22.43 £ 18.69 ADD
CL-25-HR CL25HR 1,100 kg £ 28.12 £ 23.43 ADD
CL-50-HR CL50HR 2,200 kg £ 43.00 £ 35.83 ADD
CL-120-HR CL120HR 5,400 kg £ 65.88 £ 54.90 ADD
CL-200-HR CL200HR 9,100 kg £ 117.08 £ 97.57 ADD
PART NO. LOAD
RATING
(LBS)
A
DIA
B C D
THREAD X MIN.LENGTH
E
DIA
F G H
DIA
R INSTALLATION
TORQUE
(FT-LBS)
SCREW
EXTENSION
BELOW BASE
CL-20-HR 2000 1-3/4 0 1 5/16-18x1.00 (or M8x25mm) 3/4 2 2-1/2 5/16 1/2 4-7 .58 (or 14mm)
CL-25-HR 2500 2-1/4 1-1/8 3/8-16x1.25 (or M10x30mm) 7/8 2-1/2 3-3/16 3/8 5/8 7-10 .79 (or 18mm)
CL-50-HR 5000 2-5/8 1-1/2 1/2-13x1.50 (or M12x40mm) 1-1/8 3 3-7/8 1/2 3/4 20-25 .90 (or 25mm)
CL-120-HR 12000 3-1/8 1-1/4 1-5/8 1/2-13x1.75 (or M12x45mm) 1-3/8 4 5 3/4 7/8 20-25 .90 (or 23mm)
CL-200-HR 20000 3-5/8 2-1/16 5/8-11x2.50 (or M16x60mm) 1-7/8 5 6-3/16 1 1 42-50 1.25 (or 33mm)

send a message

 

17 other products in the same category:

Customers who bought this product also bought: