Bore Clamp

Hydraulic elements for clamping in bore holes.

Bore Clamp There are 7 products.

  • ROEMHELD RHI-S026 Bore Clamps eccentric design, seat check + clamping and unclamping monitoring, for bore holes

    • Bore holes: Ø 8 – 12 mm,
    • Double acting
    • Max. operating pressure: 120 bar
  • ROEMHELD B1.480 pull-type, single and double acting, with anti-rotation device max. operating pressure 500 bar

    • Max. pulling force - 24.5 kN
    • Clamping stroke, pulling - 6.0 mm
    • max. operating pressure 500 bar
  • ROEMHELD B1.481 Pull Type Double-Acting Bore Clamp with centering function, a compact design with high clamping force and repetitive clamping accurtacy of 0.005mm

    • Bore diameter: 16 - 46 mm
    • Max. low-clamping force 0.6 - 7.9 kN
    • Admissible torque: 15 - 300 Nm
  • ROEMHELD B1.4841 Bore Clamps: Block-type, without centring function, double acting, for bore diameter 7.8 - 17.7 mm, max. operating pressure 250 bar

    • Bore hole diameter: 7.8 - 17.7 mm
    • Max. low-clamping force 5.1 - 9.8 kN
    • Expansion force , radial: 9 - 14 kN
  • ROEMHELD B1.4842 Bore Clamps: Flange type, without centring function, double acting, for bore diameter 7.8 - 17.7 mm, max.operating pressure 250 bar

    • Bore hole diameter: 7.8 - 17.7 mm
    • Max. low-clamping force 5.1 - 9.8 kN
    • Expansion force , radial: 9 - 14 kN
  • ROEMHELD B1.4843 Bore Clamps: Cartridge type, without centring function, double acting, for bore diameter 7.8 - 17.7 mm, max.operating pressure 250 bar

    • Bore hole diameter: 7.8 - 17.7 mm
    • Max. low-clamping force 5.1 - 9.8 kN
    • Expansion force , radial: 9 - 14 kN
  • ROEMHELD B1.485 Bore Clamp: Block-type eccentric, for bore diameter 6.6 to 13.8 mm, double acting, max. operating pressure 250 bar

    • Max. operating pressure 250 bar
    • Clamping range: 6.6 - 13.8 mm
    • Max. pull force: 3.8 - 6.3 kN
    • Axial clamping force: 210 - 720 N
Showing 1 - 7 of 7 items