Die Changing Technology There are 18 products.

ROEMHELD D8.800 Manually Operated Hydraulic Pump with Foot Lever, Base and Pressure Gauge

• Displacement per stroke: 2 .. 8 cm³
• Oil volume: 300 .. 970 cm³
• Usable oil volume: 150 .. 750 cm³
• Hydraulic connection: G 1/4
• Pump supplied is filled with oil

HILMA WZ 8.1834A Hydraulically Lifted Roller Bar for high loads and linear movement of dies

• Max. operating pressure: 400 bar
• Loads: up to 160 kN/m
• Roller spacing: 50 mm
• Length: up to 2500 mm (special lengths on request)
• for T-slot: 22, 28 or 36 mm
• 13/16" and 1 1/16"
• temperature range standard: 100 °C

HILMA WZ 8.18350 Carrying Consoles for easy and efficient die change on the press bed

• Load/pair : 5 - 30 kN
• Length of support: 500 - 1250 mm

HILMA WZ 8.8900 Die Changing Cart RW manually movable, with optional auxiliary drive with safety docking station, max. load capacity 500 kg

• Max. load capacity: 500 kg
• Lifting range for table height: 540 .. 1060 mm
• Table sizes: 720 x 720 / 720 x 450 mm
• Option: auxiliary drive

ROEMHELD D8.817 Two-Stage Hydraulic Pump with automatic change-over from low stage 60 bar to high stage 500 bar

• Displacement per stroke up to 60 bar: 12 cm³
• Displacement per stroke up to 500 bar: 2.4 cm³
• Oil volume: 400 - 2000 cm³
• Usable oil volume: 200 - 1800 cm³
• Operating force: 216/360 N
• Hydraulic connection: G 1/4

HILMA WZ 8.1834B Hydraulically Lifted Roller Bar for medium loads for linear movement of dies

• Max. operating pressure: 120 bar
• Loads: up to 99 kN/m
• Roller spacing and orientation are flexible
• Single-piece piece length: up to 2900 mm
• For T-slot: 18, 22, 28 or 36 mm
• 13/16" and 1 1/16

HILMA WZ 8.18351 Supported Carrying Console for easy and efficient die change on the press bed

HILMA WZ 8.8901 Die Changing Cart RW manually movable, with safety docking station max. load capacity 1,000 kg

• Max. load capacity: 1000 kg
• Lifting range for table height: 650 .. 1285 mm
• Table size: 720 x 720 mm

ROEMHELD D8.819 Screw Pump suited as a pressure source for very small clamping fixtures

• Max. operating pressure 500 bar
• Piston Ø: 25 mm
• Stroke: 43 mm
• Displacement: 21 cm³
• Displacement/revolution 0.98 cm³
• Torque: 0 - 50 Nm
• Mounting position: horizontal

HILMA WZ 8.18341 Roller and Ball Bars with Hydraulic Lifting for easy and safe die change.

• Max. operating pressure: 100 bar
• Loads: up to 55 kN/m
• Ball spacing: flexible
• Single-piece piece length: up to 2900 mm
• For T-slot: 18, 22, 28 or 36 mm
• 13/16" and 1 1/16"
• Temperature range standard: 100 °C (higher temperatures on request)

HILMA WZ 8.18352 Swivelling Carrying Console for easy and efficient die change on the press bed

HILMA WZ 8.8902 Die Changing Cart with Electric Drive RWA with electro-hydraulic lifting platform, die changing table and hydraulic ball bars, max. load capacity 1200 or 1600 kg

• Max. load capacity: 1200 or 1600 kg
• Lifting range: 250 .. 1550/1650 mm
• Table size: 1000 x 800 mm
• 4 or 6 hydraulic ball bars