Oil Boosters

Miniboosters compact design requires a minimum of space and is easy to integrate into existing or new systems. By taking advantage of lower system pressure, you eliminate the need for expensive hoses, pressure valves and piping. And you reduce the overall cost and the space needed for the hydraulic system.

Oil Boosters There are 25 products.

per page
Showing 1 - 12 of 25 items
  • HC1: 9 different intensification factors

    • PIN: 20 - 207 bar (inlet pressure)
    • PH: 800 bar maximum (outlet pressure)
    • PRETURN: As low as possible (return pressure to tank)
    • POUTLET: PH = (PIN - PReturn) i (intensification)
    • Mounting: Inline tube

  • HC2: 13 different intensification factors

    • PIN: 20–207 bar (inlet pressure)
    • PH: 800 bar maximum (outlet pressure)
    • PRETURN: As low as possible (return pressure to tank)
    • POUTLET: PH = (PIN – PReturn) i (intensification)
    • Mounting: Inline tube
  • HC2D versions: 13 different intensification factors

    • Up to 2.5 times the volume
    • PIN: 20-207 bar (inlet pressure)
    • PH: 800 bar maximum (outlet pressure)
    • PRETURN: As low as possible (return pressure to tank)
    • POUTLET: PH = (PIN - PReturn) x i (intensification)
    • Mounting: Inline tube
  • HC2D-D: 13 different intensification factors

    • Up to 2.5 times the volume
    • PIN: 20 – 207 bar (inlet pressure)
    • PRETURN: As low as possible (return pressure to tank)
    • PH: 800 bar maximum (outlet pressure)
    • POUTLET: PH = (PIN – PReturn) X i (intensification)
    • Mounting: Flange, manifold system miniBOOSTER pattern
  • HC2P: 10 different intensification factors

    • PIN: 0.4 bar vacuum to 2 bar in suction line (inlet pressure)
    • PH: 800 bar maximum (outlet pressure)
    • POUTLET PH = (PIN - PReturn) i (intensification)
    • Mounting: Inline tube
    • Rotation speed: Minimum 1,200 min-1 / maximum 3,000 Min-1
    • Starting torque: Maximum starting torque 0.14 Nm
    • Power consumption: 87 W
  • HC3: 11 different intensification factors

    • PIN: 20–207 bar (inlet pressure)
    • PH: 500 bar maximum (outlet pressure)
    • PRETURN: As low as possible (return pressure to tank)
    • POUTLET: PH = (PIN – PReturn) i (intensification)
    • Mounting: NG6 (D03) stacking manifold system
  • HC3-C: 11 different intensification factors

    • PIN: 20 - 207 bar (inlet pressure)
    • PH: 500 bar maximum (outlet pressure)
    • PRETURN: As low as possible (Return pressure to tank)
    • Intensification ratios: PH = (PIN - PReturn) i (Intensification)
    • Mounting: NG6 (D03) stacking manifold system
  • HC3 - D versions: 11 different intensification factors

    • PIN: 20 - 207 bar (inlet pressure)
    • PH: 500 bar maximum (outlet pressure)
    • PRETURN: As low as possible (Return pressure to tank)
    • Intensification ratios: PH = (PIN - PReturn) i (Intensification)
    • Mounting: Manifold system miniBOOSTER pattern
  • HC3 - F versions: 11 different intensification factors

    • PIN: 20 - 207 bar (inlet pressure)
    • PH: 500 bar maximum (outlet pressure)
    • PRETURN: As low as possible (Return pressure to tank)
    • Intensification ratios: PH = (PIN - PReturn) i (Intensification)
    • Mounting: Manifold system miniBOOSTER pattern
  • HC3-H versions: 11 different intensification factors

    • PIN: 20 - 207 bar (inlet pressure)
    • PH: 500 bar maximum (outlet pressure)
    • PRETURN: As low as possible (Return pressure to tank)
    • Intensification ratios: PH = (PIN - PReturn) i (Intensification)
    • Mounting: NG6 (D03) stacking manifold system
  • HC3-H-NG10: 11 different intensification factors

    • PIN: 20–207 bar (inlet pressure)
    • PH: 500 bar maximum (outlet pressure)
    • PRETURN: As low as possible (return pressure to tank)
    • POUTLET: PH = (PIN – PReturn) i (intensification)
    • Mounting: NG10 (D05) stacking manifold system
  • HC3-I: 11 different intensification factors

    • PIN: 20 - 207 bar (inlet pressure)
    • PH: 500 bar maximum (outlet pressure)
    • PRETURN: As low as possible (Return pressure to tank)
    • Intensification ratios: PH = (PIN - PReturn) i (Intensification)
    • Mounting: NG6 (D03) stacking manifold system
Showing 1 - 12 of 25 items