Hydro Cylinders

ROEMHELD B1.2811 Hydro-cylinder without stroke end cushioning

OBSOLETE ITEM - CONTACT HYQUIP

• Double acting
• Operating pressure 200 bar maximum
• Push force 9.8 to 100.5 kN
• Pull force 5.7 to 61.2 kN
• Strokes from 100 to 1000mm

This Hydro-cylinder is particularly suitable for fixture building, direct mounting the cylinder head and accurate centring. It is also available with a front flnage mounting option, this is purchased seperately. For operating conditions, tolerances and other data see datasheet A 0.100.

ROEMHELD B1.282 Hydro Cylinder with & without stroke end cushioning 

OBSOLETE ITEM - CONTACT HYQUIP

• Double acting
• Operating pressure 200 bar maximum
• Push force 9.8 to 100.5 kN
• Pull force 5.7 ro 61.2 kN
• Stroke, refer to datasheet

This Hydro-cylinder is particularly suitable for fixture building, direct mounting the cylinder head and accurate centring. It is also available with front and rear flange mounting options, these are purchased separately. For operating conditions, tolerances and other data see datasheet A 0.100.

ROEMHELD B1.590 Hydraulic Block Cylinders: block cylinder, design with tube, double acting

OBSOLETE ITEM - CONTACT HYQUIP

• Operating pressure 500 bar maximum
• Piston diameter ranges from 25 to 80 mm
• Rod diameter ranges from 16 to 50 mm
• Maximum push force ranges from 12.3 to 125.7 kN
• Strokes in mm steps: 60 - 1200 mm

The two cylinder heads in block form are connected by a HP tube, in which the piston is guided. The HP tube and the chromium-plated piston rod material are cut goods, which allows manufacturing of any piston strokes in a very short time.