Fixture Clamps

ROEMHELD I4.110 Double-Acting Fixture Clamp with Fixed Jaw used for machining of dimensionally stable workpieces.

OBSOLETE ITEM - CONTACT HYQUIP

• Maximum operating pressure 250 bar
• Maximum clamping force: 9.5 kN
• Jaw width: 40 mm
• Clamping stroke: 5 - 30 mm
• Maximum flow rate: 70 cm³/s

The fixture clamp with fixed jaw consists of a very small basic body with integrated hydraulic cylinder which actuates the movable jaw. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space. If fixing from below is not possible an adaptor plate for manifold mounting or tube connection is available.

ROEMHELD I4.111 Fixture clamp with fixed jaw max. clamping force 15 kN, jaw width 65 mm, double acting

OBSOLETE ITEM - CONTACT HYQUIP

• Jaw width: 65 mm
• Maximum operating pressure: 250 bar
• Maximum clamping force: 15 kN
• Clamping stroke: 5 - 45 mm
• Maximum flow rate: 100 cm³/s

The fixture clamp with fixed jaw consists of a very small basic body with integrated hydraulic cylinder which actuates the movable jaw. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space.

ROEMHELD I4.120 Fixture clamp, concentric clamping: max. clamping force 6.5 kN and 9 kN, jaw width 40 and 65 mm double acting

• Maximum operating pressure 250 bar
• Maximum clamping force: 6.5 - 9 kN/jaw
• Max. retention force: 8 - 15 kN
• Jaw width: 40 - 65 mm
• Clamping stroke: 2x5 - 2x8 mm
• Maximum flow rate: 70 - 100 cm³/s

The fixture clamp with concentric clamping function consists of a very slim basic body with 2 integrated hydraulic cylinders. The piston forces are transferred via a guided connecting link to the two clamping slides so that a centric synchronism is obtained. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space.

ROEMHELD I4.130 Fixture Clamp, Position Flexible max. clamping force 8 kN, jaw width 40 mm double acting, max. operating pressure 250 bar compensate machining forces from all directions.

• Maximum clamping force: 8 kN
• Maximum retention force: 10 kN
• Jaw width: 40 mm
• Clamping stroke: 2x 8 mm
• Maximum flow rate: 17 cm³/s
• Maximum operating pressure 250 bar

This fixture clamp with position-flexible clamping function consists of a very slim basic body with 2 integrated hydraulic cylinders. The piston forces are transmitted by two channels to the two clamping slides that can be moved independently from each other. During clamping both clamping slides contact the workpiece nearly without force.