HYQUIP offers a large selection of Carr Lane hoist rings including swivel hoist rings that swivel 360 degrees that allow lifting from any direction as well as side-pull hoist rings ideal for side mounting, pivoting hoist rings, economical lifting eyes and a variety of hoist ring accessories including rings, plates, clips & threaded inserts. Carr Lane lifting rings are available in multiple sizes with tremendous load capacity and boast an industry-leading safety factor of 5:1. Browse the full catalogue of Carr Lane hoist rings below.
Hoist Rings There are 18 products.
-
Carr Lane Swivel Hoist Rings
The original safety-engineered Hoist Ring, with a choice of Standard or Long Ring
- Load Rating: 550 - 110,000 (lbs)
- Installation Torque: 5 - 7150 (lbs)
- Long-ring version provides extra reach and allows using larger lifting hooks
-
Carr Lane Heavy Duty Swivel Hoist Rings
Heavy Duty are the next generation of Swivel Hoists Rings, with a heavy-duty forged steel ring
- Load Rating: 550 - 30,000 (lbs)
- Installation Torque: 5 - 1100 (lbs)
- Safety Factor = 5.1
-
Carr Lane EZ-Torque Swivel Hoist Rings
Extra Large Swivel Hoist Rings that allows tightening several smaller bolt heads with a standard torque wrench
- Load Rating - 15'000 - 250'000 lbs
- Thread - 1-1/4"-7 - 6"-4
- Length - 8.73 - 33.00
-
Carr Lane Shackle Hoist Rings
Swivel hoist rings are designed for permanent mounting on tooling and equipment
- Load Rating - 2000 - 24000 lbs
- Nominal Shackle Size - 3/8 - 1-1/4
-
Carr Lane Safety Hoist Rings
High Strength, forged steel Safety Hoist Ring rotate 360 degrees and the solid loop forged ring pivots 180 degrees
- Load Rating: 1000 - 2500 (lbs)
- Installation Torque: 7-10 - 42-50
- Safety factor = 5:1
-
Carr Lane Side-Pull Hoist Ring
Both Standard and Heavy-Duty Side-Pull Hoist Rings, ideal for side mounting, pivots 180° and swivels 360°
- Load Rating: 650 - 55'000 (lbs)
- Installation Torque: 3.5 - 3000 (lbs)
-
Carr Lane Pivoting Hoist Rings
Economical hoist ring with a low profile and high load capacity with forged bas and solid-loop forged ring that pivots a full 180º
- Load rating (lbs): 900kg to 9,100kg
- Thread x minimum length: M8 x 25mm to M16 x 65mm
- Base: Forged 1045 steel, black oxide finish
- Safety factor = 5:1.
-
Carr Lane Plate Lifting Systems
Fast Lok and Scissor-Lok Plate Lifting Systems designed to be installed and to add/remove shackle assembly without tools
- Pivot a full 180°
- 10,000 lbs Load Capacity
- Patent pending
-
Carr Lane Lifting Pins
Available in Stainless Steel, Lifting Pins are a single-acting ball lock pin with a solid, one-piece body and four balls for high tensions loads
- Shank Diameter - 1/4 - 1
- Grip Length - .25 - 3.00
- Load Capacity - 120 - 2900 lbs
-
Carr Lane Lifting Eyes
Lifting Eyes are simple, economical lifting devices,with an integral shoulder for greater strength, suitable for vertical lifting in-line with the threaded bolt
- Load Rating 0°: 500 - 9000 (lbs)
- Load Rating 45°: 125 - 2250 (lbs)
-
Carr Lane Heavy Duty Lifting Eyes
Heavy-Duty® Lifting Eyes suitable for fully vertical lifting only
- Vertical Load Rating - 10000 - 15000
- Thread - 1"-8 - 1-1/2" COIL
-
Carr Lane Heavy Duty Swivel Lift Plates
Heavy-Duty® Swivel Hoist Rings, with center through-hole instead of a bolt, for mounting with a custom anchoring system
- Load Rating: 7000 - 24,000 lbs
- Patent no. 4,570,987, 4,641,986, 5,405,210
