Cookies management by TermsFeed Generator

Pressure Switch with Hydro-electric Signal Convertor

ROEMHELD F9.732 Pressure Switch with Hydro-Electric Signal Converter

  • Hydro-electric signal converter
  • Pressure range 5-130 bar
  • 50-350 bar and 50-550 bar
  • Ports: G1/4 or O-ring
  • Maximum operating pressure: 600 bar
  • Electrical connection: plug DIN 43650, form A
  • Maximum load: 4.0 A at 250 VAC/3.0 A at 28 VDC
  • Hysteresis: 8 ...12 %
  • Code class: IP 65

Hydro-electric pressure switches in piston design convert the pressure in hydraulic systems into electrical signals. The switching point can be continuously adjusted and locked by means of an adjusting knob within different adjusting ranges.

Description
Downloads

Pressure Switch with Hydro-electric Signal Convertor - ROEMHELD F9.732

  • Hydro-electric signal converter
  • Pressure range 5-130 bar
  • 50-350 bar and 50-550 bar
  • Ports: G1/4 or O-ring
  • Max. operating pressure: 600 bar
  • Electrical connection: plug DIN 43650, form A
  • Max. load: 4.0 A at 250 VAC/3.0 A at 28 VDC
  • Hysteresis: 8 - 12 %
  • Code class: IP 65

Application:

Hydro-electric pressure switches are devices, which close or open electrical contacts under pressure. They are used to switch on or off pump motors, valves for unpressurised cycles, for pressure-dependent machine tool interlock or similar applications in power units, machines and installations.

Description:

Hydro-electric pressure switches in piston design convert the pressure in hydraulic systems into electrical signals. The switching point can be continuously adjusted and locked by means of an adjusting knob within different adjusting ranges. The installed microswitch is a change-over switch which can be connected as break or make contact. The electrical connection can be rotated by 4 x 90° with the housing. The pressure switches are designed for industrial use with normal environmental conditions for installations with a maximum system pressure of up to 600 bar.

Quantity Unit discount You Save