Roemheld (7)

HILMA RR 1.1560 Electric Control M1C and M2C for Magnetic Clamping Systems M-TECS

• The electric control M1C is used for small and medium-sized machines
• The electric control M2C is used for large machines
• Highest safety standards (as per EN 201/EN 289)
• Standardised integration via EUROMAP 70 interface
• Voltage: 380 ..480 VAC
• Frequency: 50/60 Hz
• Fuses: 32 A
• Code class: IP54

ROEMHELD B1.8310 Electric Swing Clamps

• Axial pulling force: 3 - 9 kN
•  Top flange, with position and clamping force monitoring
•  DC voltage 24 V
• Minimum energy demand

The electric swing clamp is driven by a brushless DC motor. The motor speed is transformed by means of a gear and a threaded spindle into the swing and stroke movement of the piston rod. For swinging the clamping arm by 180°, an axial stroke of only 3 mm is required.

ROEMHELD M8.203 Electrical Operating Elements, Lines and Connectors for the operation of electrical modulog modules, lifting modules and memory function.

ROEMHELD C 2.360 Electrically Operated Directional Control Valves with Socket Adapter ND 4

• Port size: G 1/4
• Adm. flow rate: 8 l/min
• Hydraulic oil: HLP 22
• Nominal voltage: 24 VDC
• Code class: IP 54
• Electrically Operated
• with Socket Adapter
• Maximum Operating Pressure: 350/500 bar

HILMA WZ 5.2610 Electro-Mechanical Angular Clamps with lead screw drive and position monitoring, for automatic clamping of dies.

• Max. clamping force: 120 - 160 kN
• Max. static force: 300 kN
• Travelling speed: 64 mm/s
• Clamping speed: 1 mm/s
• Total stroke 6 mm
• Clamping stroke: 2 mm
• Motor voltage: 400V, 50Hz

ROEMHELD M4.201 Double telescopic lifting module for workshop applications in the industry

• Max. lifting force 2,000 N
• Stroke from 340 to 940 mm
• Electro-mechanical telescopic version
• Max. torque: 500 Nm
• Operations: foot switch or hand panel
• Lifting speed: 70 mm/s
• Control voltage: 24 VDC
• Supply voltage: 230 VAC

HILMA WZ 5.2650 Swing Clamps electro-mechanical, with position monitoring

• Clamping force: 70 - 160 kN
• Max. static force: 110 - 300 kN
• Clamping speed: 3.8 - 4.1 mm/s
• Motor voltage: 400 V / 50 Hz
• Motor rating: 0.55 - 1.1 kW
• Clamping stroke: 11 - 12 mm
• Swing stroke: 8 - 13 mm

HIMLA WZ 5.2640 Swivel and Pull Clamps electro-mechanical, self-locking, with position monitoring

• Clamping force: 70 - 160 kN
• Max. static force: 110 - 300 kN
• Clamping speed: 3.8 - 4.1 mm/s
• Motor voltage: 400 V / 50 Hz
• Motor rating: 0.55 - 1.1 kW
• Clamping stroke: 10 - 15 mm
• Swivelling stroke: 25 - 40 mm

HILMA WZ 5.2620 Self-locking Tenon type Clamping Elements with Position Monitoring, for automatic clamping of dies.

• Clamping force: 70 - 160 kN
• Max. static force: 110 - 300 kN
• Clamping speed: 3.8 - 4.1 mm/s
• Motor voltage: 400 V / 50 Hz
• Motor rating: 0.55 - 1.1 kW
• Clamping stroke: 5 mm

HILMA WZ 5.2670 Mechanical Wedge clamps, self-locking with position monitoring, used for hydraulic free clamping of dies.

• Adm. retaining force: up to 240 kN
• Max. clamping force: 35 kN
• Total stroke: 25 and 28 mm
• Clamping stroke: 17 and 20 mm
• Lifting speed: 2,0 mm/s
• Current for empty running: 1,5 A
• Max. current: 3,8 A
• Rated voltage: 24 VDC

ROEMHELD F9.750 Electronic Pressure Sensors with Radio Transmission used to monitor hydraulic clamping fixtures

• Battery-powered
• Long-field range: max. 300 m
• Code class: IP67
• Receiver unit with antenna
• Voltage: 20 - 30 VDC
• Outputs: 4x analog or 2x analog + 2 relay
• Data interface: RS485 Modbus

This ROEMHELD Electronic Pressure Sensor with Radio Transmission operates according to the DMS principle. The measured values are sent in the ISM band to the stationary receiver unit. The replaceable lithium battery has a service life up to one year and the state of charge is constantly monitored.