Roemheld (8)

HILMA WZ 2.2480 Double-acting Extending Clamps with Mechanical Lock

• Max. clamping force: 200 kN
• Adm. retaining force: 250 kN
• Flow rate: 1.6 - 2.5 l/min
• Max. operating temperature: 70°C

Entire range of Hilma Fittings for all applicstions, download data sheet for part number information

ROEMHELD I4.111 Fixture clamp with fixed jaw max. clamping force 15 kN, jaw width 65 mm, double acting

OBSOLETE ITEM - CONTACT HYQUIP

• Jaw width: 65 mm
• Maximum operating pressure: 250 bar
• Maximum clamping force: 15 kN
• Clamping stroke: 5 - 45 mm
• Maximum flow rate: 100 cm³/s

The fixture clamp with fixed jaw consists of a very small basic body with integrated hydraulic cylinder which actuates the movable jaw. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space.

ROEMHELD I4.110 Double-Acting Fixture Clamp with Fixed Jaw used for machining of dimensionally stable workpieces.

OBSOLETE ITEM - CONTACT HYQUIP

• Maximum operating pressure 250 bar
• Maximum clamping force: 9.5 kN
• Jaw width: 40 mm
• Clamping stroke: 5 - 30 mm
• Maximum flow rate: 70 cm³/s

The fixture clamp with fixed jaw consists of a very small basic body with integrated hydraulic cylinder which actuates the movable jaw. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space. If fixing from below is not possible an adaptor plate for manifold mounting or tube connection is available.

ROEMHELD I4.120 Fixture clamp, concentric clamping: max. clamping force 6.5 kN and 9 kN, jaw width 40 and 65 mm double acting

• Maximum operating pressure 250 bar
• Maximum clamping force: 6.5 - 9 kN/jaw
• Max. retention force: 8 - 15 kN
• Jaw width: 40 - 65 mm
• Clamping stroke: 2x5 - 2x8 mm
• Maximum flow rate: 70 - 100 cm³/s

The fixture clamp with concentric clamping function consists of a very slim basic body with 2 integrated hydraulic cylinders. The piston forces are transferred via a guided connecting link to the two clamping slides so that a centric synchronism is obtained. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space.

ROEMHELD M8.120 Flange Plate for Modulog Rotating Modules

ROEMHELD B1.4842 Bore Clamps: Flange type, without centring function, double acting, for bore diameter 7.8 - 17.7 mm, max.operating pressure 250 bar

OBSOLETE ITEM - CONTACT HYQUIP

• Double acting
• Operating pressure 250 bar maximum
• Bore hole diameter ranges from 7.8 to 17.7 mm
• Maximum low-clamping force ranges from 5.1 to 9.8 kN
• Expansion force , radial: 9 - 14 kN

This bore clamp is a double-acting pull-type cylinder. An exchangeable clamping bushing is fixed to the piston. The four segments of the clamping bushing are radially expanded with spring force by a pyramid- shaped clamping bolt. Thus the expansion force is always the same and independent of the hydraulic clamping pressure. 

ROEMHELD B1.8231 Flat Clamp with optional position monitoring, double acting

• Double acting
• Maximum clamping force: 12.3 - 23.6 kN
• Operating pressure 500 bar maximum
• Clamping stroke ranges from 9 to 16 mm

The flat clamp is a double-acting hydraulic clamping element where the piston acts via a con-rod onto a clamping lever. In unclamped position, the clamping lever is completely retracted and the workpieces can easily be inserted from above.

HILMA Single-Acting Flat Clamping Bar, on die bending presses and folding presses for the upper die and on the press slide.

HILMA WZ 3.2280 Rapid clamping systems used for the automatic clamping of dies of varying sizes on the press ram

• 8 different clamping elements
• 4 different T-slots
• 3 different adjustment tracks

ROEMHELD M6.201 Floor Modules FMD for use as base frame for height adjustable working places.

• Max. load: 8,000 N
• with two modulog interfaces
• Adjustable articulated feet

ROEMHELD M6.101 Floor Modules for use as base frame for height adjustable working places.

• Max. load 6,000 N
• Adjustable articulated feet
• Frame: steel, black-lacquered