Carr Lane drill-press toggle clamps are perfect for use on drill presses, featuring an adaptor base designed for slotted tables and a quick-adjusting spindle. The open arm allows for easy adjustment of the spindle position. It comes with two quick-adjusting flat-cushion spindles—one short and one long. Select the T-Nut size that matches your table slot (3/8, 7/16, 1/2, 9/16, 5/8, 10mm, 12mm, 14mm, or 16mm), and choose from inch or metric threads (5/16-18, 3/8-16, M8, or M10). It is also available without a T-Nut for use with tapped jig plates.
A precision side locator that can be securely doweled after adjustment. Ideal for vertical levelling or horizontal positioning. Offered in both hardened and soft versions, allowing for drilling and reaming post-installation. Available in two thickness options: 1/4" and 3/8".
Eccentric Liners can be paired with Spring Locating Pins to offer extra adjustment for workpieces with looser tolerances. They are compatible with all three force types and are available to fit any of the five sizes of Spring Locating Pins, ranging from 1/4" to 5/8" body diameter.
Economical , quick-release detent pin used in applications where grip length isn't important. These alignment pins are are equipped with a on spring-loaded locking ball and has a ring rather than a solid shoulder. The locking balls use spring force to lock the pin in place and doesn't use positive locking like a ball lock pin. Using these detent pins is easy, simply push the pin to insert and pull to remove.
Edge Grippers are useful for applications where installation of traditional face-mounted grippers is difficult. With a flat design that positions the mounting screw parallel to the serrated face, they offer an efficient solution. These grippers are especially effective when mounted at the top edge of a clamping surface, such as a vise jaw. Made from durable, replaceable inserts that, when installed to a fixture, enhance both holding power and wear resistance. Their design allows them to slightly penetrate the workpiece, increasing gripping force beyond simple static friction. Available in square sizes ranging from 3/8" to 1" (10 to 25mm), with various thicknesses and serration options. These are available in serrations including fine, super fine and extra fine.
Carr Lanes eye bolts are equipped with a reamed bearing hole and are manufactured using solid barstock to ensure high strength. These are available in metric and imperial sizing as well as both stainless steel and high-carbon steel.
EZ-Cast Liners are permanent bushings that secure replaceable drill bushings on either the "slip" side or the "fixed" side. This knurled liner features an integrated lockscrew, designed for cast-in-place or potted installations. The diamond-knurled outer diameter offers superior resistance to both rotational and axial forces. As the outer diameter of the bushing is not ground, precise alignment of the inner diameter during casting or potting is essential to maintain accuracy in the completed tool.
Feet for swivel screws are available in a variety of finishes, including steel zinc plated yellow chromate, steel with a black oxide finish and stainless steel. Carr Lane offer four types of swivel screw feet, including small, large, extra-large and ball variations. These are available in metric sizes from M6 to M16 and in imperial sizes from ¼ - 20 to 5/8-11.
Ferrules are for crimping on our nylon-coated cable to make a loop, available for all four standard cable sizes
