Carr Lane (26)

Care Lane’s range of toggle camp accessories include jam nuts, clamping spindles and cushions. Each of these are available in multiple variations of size material and design. This includes  steel, stainless steel and vinyl dipped steel options as well as both metric and imperial sizes.

• Available in thread sizes #8-32 to 5/8-11 (M4 to M16 in metric)
• Available in metric and  imperial
• Available in steel, stainless steel and vinyl dipped steel

Carr Lane toggle pliers are designed to combine toggle action with a manual squeezing motion. They can be used as practical alternative to screw-tightening C clamps. This range offers high-strength forged steel toggle pliers in six different sizes with a holding capacity from 200lbs to 700lbs.

• Available in 6 different sizes
• Holding capacity from 200 - 700 lbs

Screw jack equipped with a spring-loaded clutch system. The knurled head automatically disengages once the specified end force is reached, preventing damage to thin-walled and delicate workpieces. This comes with a Knurled Check Nut and is available in thread sizes ranging from 1/4-20 to 5/8-11.

• Thread: 1/4-20 - 5/8-11
• Controlled Torque Counterclockwise, Positive retraction clockwise

Turn Screw available in Quarter and Half turn type, ideal for swing-away lids and jig plates

• Thread: #10-24 - 1/2-13 or M5 - M12
• Metric and Imperial sizes

Carr Lane Un-A-Lok® Liners feature  a locking tab that removes the requirement for a lockscrew. UL Liners serve as permanent bushings designed to secure SF renewable drill bushings on the "slip" side, but not the "fixed" side. These Liners significantly reduce installation time in comparison to using a headliner with a lockscrew.

• OD - 5/16 - 1-3/8
• ID RANGE - 3/16 - 1
• Imperial sizes with a variety of lengths

Universal Lifting Rings are removable lifting rings that each fit three different thread sizes. Available in two ring sizes, with a different load capacity for each thread size. Suitable for fully vertical lifting only, in-line with the threaded bolt, such as when lifting from a single point or from two points with a spreader bar. Forged alloy-steel shackle.

The smaller size fits three threads with the following load capacities:

• 1/4-20 400 lbs
• 5/16-18 800 lbs
• 3/8-16 1400 lbs

The larger size fits three threads with the following load capacities:

• 1/2-13 2600 lbs
• 5/8-11 4000 lbs
• 3/4-10 6000 lbs

Carr Lane offer various types of washers including flat washers, spherical washers and knurled face washers. Flat washers have a serrated surface designed to stop two parts from slipping relative to one another. Spherical Washers are robust two-piece washers designed to adjust when a stud and clamping surface are not perfectly perpendicular. These items are available in metric and imperial sizing as well as steel and stainless-steel options for selected products.

• Available in metric and imperial
• Available in steel and stainless steel

Mini-size stainless steel version of our Tapped-Heel Clamp Straps. Extra-wide nose can be used to distribute clamping force evenly, or to clamp two parts simultaneously. This clamp strap can be ordered individually, or in a complete clamp assembly. The available assemblies are assembly with knurled-head screw, assembly with clamp rest and assembly with levelling foot. These are available in one size, to fit 1/4-20 studs

These precision locating pins are ideal for positioning workpieces due to the broad range of available head diameters, allowing them to fit machined holes in the part.  Along with standard diameters, custom head sizes ranging from .1150" to 1.0400" can be quickly produced in .0001" increments to meet specific requirements.  Typically, a Round Locating Pin and a Diamond Locating Pin are used together to align from two holes without causing interference, as the Diamond Locating Pin is specially relieved for this purpose. The press-fit shank is designed for permanent installation whereas the lockscrew variant is manufactured with a slip-fit shank for renewable installation.

• Round and Diamond
• Metric and Imperial sizes
• Shank Diameter - 5/16 - 1

These precision locating pins are ideal for positioning workpieces due to the broad range of available head diameters, allowing them to fit machined holes in the part.  Along with standard diameters, custom head sizes ranging from .1150" to 1.0400" can be quickly produced in .0001" increments to meet specific requirements.  Typically, a Round Locating Pin and a Diamond Locating Pin are used together to align from two holes without causing interference, as the Diamond Locating Pin is specially relieved for this purpose. The press-fit shank is designed for permanent installation whereas the lockscrew variant is manufactured with a slip-fit shank for renewable installation.

• Round and Diamond Lockscrew Type
• Metric and Imperial sizes
• Shank Diameter - 5/16 - 1

Carr Lane short spring plungers are self-contained plungers that have a shorter overall length and shorter stroke than the standard plungers. These are available in many different sixes and forced. Short plungers are available In both stainless steel and steel as well as both metric and imperial sizes. Various types of nose are available across Carr Lanes range of short spring plungers.

• Steel and stainless steel available
• Metric and Imperial sizes available
• Thread sizes ranging from #8-32 to 5/8-11