Roemheld (24)

Zero Point Mounting System 3000

Zero point mounting system 4000

HILMA WZ 8.18351 Supported Carrying Console for easy and efficient die change on the press bed

ROEMHELD B1.8812 Swing Clamps with Reinforced Swing Mechanism: bottom flange, position monitoring optional, pendulum eye/fork head

• Maximum operating pressure 500/160 bar
• Maximum clamping force: 1.4 - 11.2 kN
• Rod diameter: 20 - 32 mm
• Piston diameter: 25 - 40 mm
• Clamping stroke: 22 - 25 mm
• Maximum flow rate: 8 - 20 cm³/s

The hydraulic swing clamp is a double-acting pull-type cylinder where a part of the total stroke is used to swing the piston.

ROEMHELD B1.8802 Swing Clamps with Reinforced Swing Mechanism: top flange, position monitoring optional, double acting, pendulum eye/fork head

• Maximum operating pressure 500/160 bar
• Maximum clamping force: 1.4 - 11.2 kN
• Rod diameter: 20 - 32 mm
• Piston diameter: 25 - 40 mm
• Clamping stroke: 22 - 25 mm
• Maximum flow rate: 8 - 20 cm³/s

The piston end of this swing clamp is designed as pendulum eye or fork head. By means of a double clamping arm 2 workpieces can be clamped at the same time. For both versions a springy element is required in order to maintain the double clamping arm in the unclamped position in horizontal position.

ROEMHELD B1.8805 Swing Clamp with Piston Rod Locking:  Top flange, reinforced swing mechanism, position monitoring optional, double acting

• Maximum operating pressure 250 bar
• Maximum clamping force: 8.5 - 13 kN
• Rod diameter: 32 - 40 mm
• Piston diameter: 40 - 50 mm
• Clamping stroke: 20 - 22 mm
• Maximum flow rate: 20 - 36 cm³/s

The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The piston rod locking is made by a separately-controlled doubleacting wedge-shaped piston.

ROEMHELD B1.8801 Swing Clamps with Reinforced Swing Mechanism: top flange, position monitoring optional, double acting

• Maximum operating pressure 500 bar
• Maximum clamping force: 6.8 - 41 kN
• Rod diameter: 32 - 50 mm
• Piston diameter: 40 - 63 mm
• Clamping stroke: 20 - 22 mm
• Maximum flow rate: 20 - 55 cm³/s

Hydraulic swing clamps are used for clamping of workpieces when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.

ROEMHELD B1.8806 Swing Clamps without Swing Stroke: top flange, reinforced swing mechanism, position monitoring optional, double acting

• Maximum operating pressure 350 bar
• Maximum clamping force: 5 - 18 kN
• Rod diameter: 20 - 40 mm
• Piston diameter: 25 - 50 mm
• Clamping stroke: 12 - 20 mm
• Maximum flow rate: 5 - 36 cm³/s

The swing clamp without swing stroke is a double-acting pull-type cylinder where a part of the piston stroke is used to swing the piston rod without axial stroke.

HILMA WZ 4.2170 Swing Clamping Elements, this swivel and pull clamp is available in sizes 60, 104, 164 kN or 216 kN at 400 bar operating pressure., with flanged or pipe connection.

• Max. clamping force: 60 - 216 kN
• Piston diameter: 52 - 88 mm
• Clamping stroke: 5 - 6 mm
• Clamping edge: 18 - 28 mm
• Swing angle: 90°

ROEMHELD B1.880 Swing Clamps with Overload Protection Device: top flange, single and double acting

• Maximum operating pressure 500 bar
• Maximum clamping force: 2.8 - 41 kN
• Rod diameter: 20 - 50 mm
• Piston diameter: 25 - 63 mm
• Clamping stroke: 11 - 50 mm
• Maximum flow rate: 3 - 28 cm³/s

ROEMHELD B1.881 Swing Clamp with Overload Protection Device: Bottom flange and threaded body, single and double acting

• Maximum operating pressure 500 bar
• Maximum clamping force: 2.8 - 41 kN
• Rod diameter: 20 - 50 mm
• Piston diameter: 25 - 63 mm
• Clamping stroke: 11 - 50 mm
• Maximum flow rate: 3 - 28 cm³/s

This hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. It is used for the clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.

ROEMHELD B1.8803 Swing Clamps with Overload Protection Device: cartridge type, double acting

• Maximum operating pressure 500 bar
• Maximum clamping force: 6.8 - 41 kN
• Rod diameter: 20 - 50 mm
• Piston diameter: 25 - 63 mm
• Clamping stroke: 11 - 25 mm
• Maximum flow rate: 3 - 27 cm³/s

This hydraulic clamping element is a pull-type cylinder where a part of the total stroke is used to swing the piston.