Roemheld (9)

ROEMHELD Synchronous Flow Dividers, made to split the entering input flow into two equal output flows

• Max. operating pressure 350 bar
• Max. flow rate Q CN = 3.8 to 45 l/min
• 3 sizes: 3.8 - 45 l/min
• Pipe connection: G1/4 or G1/2
• Splitting ratio: 1:1
• Fluid hydraulic oil as per DIN 51524
• Viscosity range: 4 - 1500 mm2s

ROEMHELD C2.9501 Adjustable Flow-control Swivel Banjo Coupling, 2 versions

• Maximum operating pressure - 500 bar
• 90° elbow coupling with integrated throttle
• Socket head cap adjusting screw
• Fitting for tube diameter - 8 mm

HILMA RHI-WZ-001 Grip Rail Couplings used on transfer presses for automatic centring, coupling and clamping, when max.clamping force in small space is required.

HILMA WZ 4.2900 Electro-Mechanical version of the Grip Rail Couplings, used for centring, coupling and clamping of grip rails.

• Max. clamping force: 100 kN
• Motor rating: 0.25 kW
• Centring repeatability: ± 0.02 mm
• Adm. horizontal positioning accuracy: -1/+3 mm
• Adm. axis offset: ± 2 mm

ROEMHELD WZ 4.2900 Hydraulic Version of the Grip Rail Couplings, used for centring, coupling and clamping of grip rails.

• Max. clamping force: 60 .. 100 kN
• Operating pressure: 60 bar
• Centring repeatability: ± 0.02 mm
• Adm. horizontal positioning accuracy: -1/+3 mm
• Adm. axis offset: ± 2 mm

HILMA WZ 4.2900 Mechanical Version of the Grip Rail Couplings, used for automatic centring, coupling and clamping of grip rails.

• Max. clamping force: 60 .. 100 kN
• Torque: 180 .. 300 Nm
• Centring repeatability: ± 0.02 mm
• Adm. horizontal positioning accuracy: -1/+3 mm
• Adm. axis offset: ± 2 mm

HILMA WZ 8.18350 Carrying Consoles for easy and efficient die change on the press bed

• Load/pair : 5 - 30 kN
• Length of support: 500 - 1250 mm

ROEMHELD F9.500 High Pressure Filters available in six versions

• Version with rectifier function F9.500-1
• Version for high flow rates F9.500-2
• Compact version F9.500-3
• Plug-in filter, small - F9.500-4
• Plug-in filter, compact - F9.500-5
• Steel filter 500 bar - F9.500-6

Filter elements are used to protect hydraulic elements against contaminations. They are installed e.g. in front of valves and intensifiers and avoid the penetration of swarf and contaminations. The safety of functioning as well as the life are considerably increased.

ROEMHELD C 2.940 High-pressure Flow Control Shut-off Valves

• Maximum operating pressure 500 bar
• Nominal diameter: ND 6 and 12
• Temperature range: 40º ... + 100ºC
• Ports: G1/4 or G1/2

ROEMHELD C 2.940 High-pressure Flow Control Shut-off Valves with Locking Screw

• Max. Operating Pressure - 350bar
• Flow control valve ND 4, ND 6 and ND 12
• ND4: connecting thread G1/8
• ND6: connecting thread G1/4
• ND12: connecting thread G1/2

ROEMHELD C 2.940-3 High-pressure shut-off flow control valves

• Flow control valves - G 1/4
• Operation by turning knob
• Connecting thread - G1/4
• Max. Operating Pressure - 500 bar

Hilma Compact Clamping Claw with Movable Clamping Lever