High Pressure Filters
ROEMHELD F9.500 High Pressure Filters available in six versions
- Version with rectifier function F9.500-1
- Version for high flow rates F9.500-2
- Compact version F9.500-3
- Plug-in filter, small - F9.500-4
- Plug-in filter, compact - F9.500-5
- Steel filter 500 bar - F9.500-6
Filter elements are used to protect hydraulic elements against contaminations. They are installed e.g. in front of valves and intensifiers and avoid the penetration of swarf and contaminations. The safety of functioning as well as the life are considerably increased.
High Pressure Filters - ROEMHELD F9.500
High-Pressure Filters made of stainless steel and steel, available in six versions.
All above 300 bar maximum operating pressure.
Version with rectifier function F9.500-1
- Filter performance: 10 μm
- Suitable for large flow rates, Max. flow rate: 15 l/min
- Filter insert can be cleaned
- Filter material: stainless steel
- Simple exchange of the filter insert without dismounting the element
- Body material: stainless steel
- Connections: G1/4 or O-ring - Connection via fittings or drilled channels
- Max. operating pressure: 350 bar
- Flow direction variable
Version for high flow rates F9.500-2
- Filter performance: 10 μm max.
- Suitable for large flow rates, Flow rate: up to 50 l/min
- Filter insert can be cleaned
- Filter material: stainless steel body
- Material: stainless steel
- Connections: G 1/4
- Max. operating pressure: 350 bar
Compact version F9.500-3
- Filter performance: 10 μm
- Compact design for use in limited space
- Max. flow rate: up to 25 l/min
- Filter insert can be cleaned
- Filter material: stainless steel
- Body material: stainless steel
- Connections: G1/4 or O-ring
- Max. operating pressure: 350 bar
Plug-in filter, small - F9.500-4
- Filter performance: 10 μm
- Max. flow rate: 3 l/min
- Filter material: stainless steel
- Body material: stainless steel
- Max. operating pressure: 350 bar
- Minimum dimensions
- For installation in drilled channels and plates, thereby direct protection of hydraulic components
Plug-in filter, compact - F9.500-5
- Filter performance: 10 μm
- Max. flow rate: up to 25 l/min
- Filter material: stainless steel
- Body material: stainless steel
- Max. operating pressure: 350 bar
- Compact dimensions
- For installation in drilled channels and plates, thereby direct protection of hydraulic components
Steel filter 500 bar - F9.500-6
- Filter performance: 100 μm
- Max. flow rate: up to 9 l/min
- Filter material: steel
- Body material: steel, galvanized
- Connections: G 1/4
- Max. operating pressure: 500 bar
- For installation in front of couplings
- For protection against rough swarf
- Flow direction variable
Filter elements are used to protect hydraulic elements against contaminations. They are installed e.g. in front of valves and intensifiers and avoid the penetration of swarf and contaminations. The safety of functioning as well as the life are considerably increased.
Up to their complete clogging all filters are pressure stable up to the max. operating pressure and due to their stainless steel version they can be used also for water and other liquids as e.g. cooling lubricants (except 3887-030).
| Quantity | Unit discount | You Save |
|---|