Home

HILMA WZ 8.18343 Ball Bars with Spring Pack and Hydrulic Lifting of individual bars for flexible, horizontal movement of dies.

• Any variable length in one-piece design up to 2900 mm
• Suitable for T-slots with a size of 18, 22, 28 or 36 mm
• Single-piece piece length: up to 2900 mm
• Temperature range standard: 100 °C (higher temperatures on request)

HILMA WZ 3.2204  Sliding Clamps classic single acting, with spring return

• Max. clamping force: 19.2 - 78 kN
• For T-slot: 18 - 28 mm
• Clamping stroke: 8 - 12 mm
• Max. temperature: 120°C
• Max. operating pressure 400 bar

HIMLA WZ 5.2640 Swivel and Pull Clamps electro-mechanical, self-locking, with position monitoring

• Clamping force: 70 - 160 kN
• Max. static force: 110 - 300 kN
• Clamping speed: 3.8 - 4.1 mm/s
• Motor voltage: 400 V / 50 Hz
• Motor rating: 0.55 - 1.1 kW
• Clamping stroke: 10 - 15 mm
• Swivelling stroke: 25 - 40 mm

Hilma Rapid clamping system with pusher chain

• Clamping force: 100 kN
• Max. operating pressure: 80 bar
• Max. stroke: 8 mm
• Positioning stroke: 3 mm
• Max. clamping stroke: 4 mm

HILMA WZ 2.2230 Swing Sink Clamps for External Clamping, for fastening to a press bed and a press slide when the available space is limited

• Max. clamping force: 104 - 216 kN
• Clamping and lowering stroke: 105 - 112 mm
• Swing angle: 2 x 45°
• Max. clamping edge height: 68 mm
• Max. flow rate 50 - 120 cm³/s

HILMA WZ 2.1330 Short-stroke Hollow Piston Cylinder, used in connection with tie rods and sceews for clamping and locking dies

• Max. clamping force: 22 - 54 kN
• Clamping stroke: 2.5 - 3 mm
• Spring force: 0.27 - 0.67 kN
• Piston area: 5.5 - 13.5 cm²
• Fixing screw: M12 - M16

• Max. clamping force: 25 .. 630 kN
• Adm. retaining force: 35 .. 820 kN
• Cylinder diameter: 25 .. 125 mm
• Clamping stroke: 20 .. 40 mm
• Max. temperature: 160/100 °C (300 °C on request)

HILMA M-TECS 80-B Magnetic Clamping Systems for Sheet Metal Forming

• Max. working temperature: 80°C
• Pole 50 mm: 350 daN / pole
• Pole 70 mm: 750 daN / pole
• Plate thickness: 55mm, pole 50x50mm
• Plate thickness: 67mm, pole 70x70mm
• Magnetic penetration depth: 15-20mm

Max. Clamping Force

• DS 100 M: 25 kN at 55 Nm
• DS 125 M: 40 kN at 115 Nm
• DS 100 H: 25 kN at 400 bar
• DS 125 H: 40 kN at 400 bar

ROEMHELD MC Series for 5-aixs Machining. Compact design enables machining of the workpiece from all sides and ensures collision-free tool paths, ideal for use on 5-axis machining centres and pallet systems

The individual elements of the fixture are composed of an axially adjustable piston rod in a housing. The rod can be clamped in any position via a KOSTYRKA clamping sleeve.

Assignment of seal kits to hydraulic elements