Roemheld (2)

ROEMHELD M8.100 Base Plates for Modulog Lifting Modules.

ROEMHELD M4.101 Lifting Module for ergonomic design of working places

• Max. lifting force 1,000 N
• Stroke from 200 to 600 mm
• Manual-hydraulic version
• Max. lifting force: 1000 N
• Max. torque: 100 Nm
• Stroke: 200 to 600 mm
• Operation: foot pedal
• Pump strokes per 100 mm 8

ROEMHELD B1.553 Compact, Double-Acting Short-Stroke Cylinder with very high press and pulling force and adjustable control of the piston position by magnetic sensors.

• Maximum operating pressure 500 bar
• Piston diameter 25 - 63 mm
• Rod diameter 16 - 40 mm
• Stroke 20 - 100 mm
• Maximum push force 24.5 - 155.9 kN

Block cylinders and mini slides with force/stroke measuring system

ROEMHELD B1.530 Block Cylinders: with adjustable stroke end cushioning and optional stroke end control double acting

• Maximum operating pressure 500 bar
• Piston diameter 25 - 100 mm
• Rod diameter 16 - 63 mm
• Stroke 25 - 100 mm
• Maximum push force 24.5 - 392 kN

ROEMHELD B1.544 Double-acting block cylinders with position monitoring are particularly suitable for automated installations, time and cycle-dependent clamping and unclamping.

• Maximum operating pressure 350 bar
• Piston diameter 25 - 63 mm
• Rod diameter 16 - 40 mm
• Stroke 20 - 100 mm
• Maximum push force 17.1 - 109.2 kN

ROEMHELD B1.560 Block Cylinder, with Anti-rotation Piston: aluminium housing for adjustable magnetic sensors, double acting

• Maximum operating pressure 350 bar
• Piston diameter 32 - 50 mm
• Rod profile P3G 22 - 40 mm
• Stroke 25 - 100 mmMax. push force: 28.1 - 68.7 kN

ROEMHELD B1.552 Double-Acting Block Cylinders with Extended Piston Rods are used if one or several piston positions have to be controlled.

• Operating pressure 500 bar maximum
• Piston diameter ranges from 25 to 125 mm
• Rod diameter ranges from 16 to 80 mm
• Stroke ranges from 20 to 50 mm
• Maximum push force: 20.6 - 610 kN

The piston is equipped with a rod of diameter 10 mm that protrudes at the cylinder bottom. At this rod the customer can fix a control cam that is used to operate any limit switch or sensor. As an accessory a complete position monitoring system is available. This unit contains a control cam as well as two inductive proximity switches. The switches can be displaced in the housing which will be screwed to the bottom of the cylinder.

ROEMHELD B1.542 Double-Acting Block Cylinder with Externally Threaded Piston Rod used universally for all hydraulic-operated linear movements

• Operating pressure 500 bar maximum
• Piston diameter ranges from 25 to 63 mm
• Rod diameter ranges from 16 to 40 mm
• Stroke: 50 and 63 mm
• Maximum push force: 24.5 - 155.9 kN

This double-acting block cylinder whose piston rod is provided with an external thread. Fixing elements as for example rod end bearings, which are available as accessory, can be screwed onto the external thread.

ROEMHELD B1.4841 Bore Clamps: Block-type, without centring function, double acting, for bore diameter 7.8 - 17.7 mm, max. operating pressure 250 bar

OBSOLETE ITEM - CONTACT HYQUIP

• Double acting
• Operating pressure 250 bar maximum
• Bore hole diameter ranges from 7.8 to 17.7 mm
• Maximum low-clamping force 5.1 - 9.8 kN
• Expansion force , radial: 9 - 14 kN

This bore clamp is a double-acting pull-type cylinder. An exchangeable clamping bushing is fixed to the piston. The four segments of the clamping bushing are radially expanded with spring force by a pyramid-shaped clamping bolt. Thus the expansion force is always the same and independent of the hydraulic clamping pressure.

ROEMHELD B1.890 Swing Clamps with Overload Protection Device: block type, double acting

• Maximum operating pressure 500 bar
• Maximum Operating Pressure: 500 bar
• Piston rod diameter: 20 up to 50 mm
• Maximum clamping forces from 6.5 to 38.5 kN
• Clamping strokes 7 up to 11 mm, total strokes 14 up to 20 mm

These swing clamps are used when it is required to keep the fixture workpiece area free of straps and clamping components for unrestricted workpiece loading and unloading.

ROEMHELD B1.481 Pull Type Double-Acting Bore Clamp with centering function, a compact design with high clamping force and repetitive clamping accurtacy of 0.005mm

• Bore diameter ranges from 16 to 46 mm
  
• Maximum low-clamping force ranges from 0.6 to 7.9 kN
  
• Admissible torque 15 - 300 Nm
  
• Double acting 

This Bore Clamp is a combination of a double acting pull-type cylinder equipped with a segement clamping bushing, which is pulled by a tie rod over a fixed cone. Thereby the segment clamping bushing expands radially to the bore diameter of the workpiece to be clamped.