ROEMHELD B1.5601 Built-in Anti-rotation Pistons: Piston and threaded bushing, complete with seals, double acting Max. operating pressure 350 bar
ROEMHELD B1.5401 Built-in Elements with seals for block cylinders, the built-in elements consist of piston and threaded bushing
These built-in elements consist of piston and threaded bushing. The piston is inserted into the location hole of the fixture. Then the built-in bushing is screwed into the fixture body. The bushing is let-in flush to the housing. Tightening of the threaded bushing is made with a pin-type face spanner.
ROEMHELD B1.462 Plunger Piston with integrated pull-back spring, stroke limitation and fastening screw form a unit that cannot be disassembled.
ROEMHELD M5.101 Cart Modules WMS for the transport of devices, assembly fixtures or testing devices within the production.
ROEMHELD B1.4843 Bore Clamps: Cartridge type, without centring function, double acting, for bore diameter 7.8 - 17.7 mm, max.operating pressure 250 bar
This bore clamp is a double-acting pull-type cylinder. An exchangeable clamping bushing is fixed to the piston. The four segments of the clamping bushing are radially expanded with spring force by a pyramid-shaped clamping bolt. Thus the expansion force is always the same and independent of the hydraulic clamping pressure.
ROEMHELD 1.7301 Clamping and Supporting Element: cartridge-type version, self-locking, double acting
ROEMHELD B1.827 Compact Clamps: Cartridge type, pneumatic position monitoring optional, double acting
The hydraulic compact clamp is a doubleacting pull-type cylinder where a part of the linear stroke is used to swing the clamping lever onto the workpiece. The version with cover is inserted in open bore holes and enables the smallest possible building height. The version without cover requires a closed pocket hole.
ROEMHELD B1.852 Swing Clamps with Sturdy Swing Mechanism: Cartridge type, position monitoring optional, double acting
The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The favourable area ratio (piston/piston rod) allows high clamping forces already at relatively low oil pressures. For high flow rates the swing speed is limited by an orifice in the clamping port. Thus, uniform clamping of several swing clamps is also possible when oil supply is effected through a common bore.
ROEMHELD B1.730 Clamping and Supporting Element: self-locking, double acting
OBSOLETE ITEM - CONTACT HYQUIP
The clamping and supporting element is a hydraulic clamping cylinder with mechanical locking according to the wedge principle. Forces which are directed against the clamping force, e.g. machining forces will be supported with a negligible elasticity of the wedge-shaped piston. The counter force must not exceed the maximum clamping force.
HILMA WZ 2.2096 Clamping Bars permanently installed on press beds and rams, used on machines and plants for clamping and locking.
HILMA WZ 2.2095 Clamping bar with press-in piston single-acting with spring return
ROEMHELD Compact design clamping system with universal use in manual applications as well as automated processes.
