Roemheld (21)

ROEMHELD F 9.280 Rotary Couplings: single, twin, four and six passages with / without leakage oil recirculation

• Maximum operating pressure 500 bar
• Single, twin, four and six passages
• Without/with leakage oil port

The rotary coupling has to be connected to the power unit on all levels to ensure sufficient lubrications of the seals. The rotary couplings must only be used in a temperature range between + 10 °C and + 60 °C. This also applies to possible special versions with FKM seals. Operating conditions, tolerances and other data see data sheet A 0.100.

ROEMHELD F 9.290 Rotary Valve Couplings

• ND 5
• Max. operating pressure 500 bar
• Loading and unloading in one station
• Loading and unloading in two stations
• Commonly or separately controlled
• Number of stations 5 to 10

• Max. tilting: 800 Nm
• Max. torque: 120 Nm
• Holding torque: 350 Nm
• Angle of rotation: 360°
• Index: 90° standard
• Supply voltage: 24 - 30 VDC

ROEMHELD M1.301 Highly-Stressable Rotating Module for universal use in assembly and handling processes in the industry

• Max. load 6,000 N
• Manual operation
• Max. load: 6000 N
• Max. torque, axial: 800 Nm
• Max. torque, radial: 800 Nm
• Angle of rotation: 360°

ROEMHELD M 1.101

• Max. load: 2000 N
• Max. torque, axial/radial: 800 Nm
• Rotates in both directions - Angle of rotation: 360°
• Safe indexing, rotating and indexing possible by one-hand operation

ROEMHELD B1.7385 RS Hydraulic Slide: double acting, with 4 guide rods, with optional stroke end control

• Max. operating pressure 250 bar
• Piston diameter: 25 - 100 mm
• Rod diameter: 16 - 60 mm
• Stroke: 50 - 200 mm
• Max. push force: 12.3 - 196.4 kN
• Diameter of the guides: 16 - 50 mm
• Standard or Reinforced version

ROEMHELD D8.819 Screw Pump suited as a pressure source for very small clamping fixtures

• Maximum operating pressure 500 bar
• Piston Ø: 25 mm
• Stroke: 43 mm
• Displacement: 21 cm³
• Displacement/revolution 0.98 cm³
• Torque: 0 - 50 Nm
• Mounting position: horizontal

The screw pump is especially suited as a pressure source for very small clamping fixtures, which must be independent of an external pressure source.

ROEMHELD WS 5.3670 - Hydraulically or Mechnically operated SCS Workholding Systems, ideal for all clamping tasks on 5-axis machining centres and pallet systems

Max. clamping force:

• SCS 80: 25 kN at 60 Nm
• SCS 120: 40 kN at 100 Nm
• SCS 80: 20 kN at 310 bar
• SCS 120: 40 kN at 270 bar

ROEMHELD B1.930 Work Support, Self-Locking: with pneumatic position monitoring, 3 sizes, 2 types of function, double acting

• Max. operating pressure 500/400 bar
• Cross section of the body: 70x48 - 140x105 mm
• Max. load force: 8 - 40 kN
• Plunger diameter: 16 - 40 mm
• Plunger stroke: 8 - 20 mm
• Max. flow rate: 25 cm³/s
• Elastic deformation: 0.7 - 1.0 µm/kN

ROEMHELD C 2.954-2 Sequence valve ND 4 with check valve

• Port size: G 1/4
• Adjustment ranges: 10 - 75 / 10 - 150 / 100 - 450 bar
• Max. flow rate: 8 l/min

ROEMHELD C 2.9545 Sequence Valve ND 5 with time-dependent swtiching sequence.

• Max. operating pressure 250 bar
• Port size: ND5
• Adjustment range: 1 - 10 s
• Max. flow rate: 8 l/min
• with time-dependent switching sequence
• Min. operating pressure: 30 bar
• Max. operating pressure 250 bar

ROEMHELD C 2.954 Sequence Valve ND 4 with Check Valve

• Port size: G 1/4
• Adjustment ranges: 10 - 75 / 10 - 150 / 100 - 450 bar
• Max. flow rate: 8 l/min
• with Check Valve
• Max. operating pressure 500 bar