HILMA WZ 4.2351 T-slot Pull Clamp facilitates a die standardisation by means of T-slot bars or T-nuts on the die
ROEMHELD B1.910 Work Supports: Extending hydraulically – contact by spring force, single acting with spring return
With the B1910 range the support plunger is retracted in off-position. When pressurised the support plunger moves against the inserted workpiece by means of spring force. With increasing oil pressure, the plunger locks hydraulically. After the system has been unclamped, the support plunger returns to off-position. The support plunger is provided with female thread to enable the use of threaded pieces for height adjustment.
ROEMHELD B1.880 Swing Clamps with Overload Protection Device: top flange, single and double acting
ROEMHELD B1.490 Slideway Locking Cylinders: single acting without spring return max. operating pressure 500 bar
ROEMHELD B1.544 Double-acting block cylinders with position monitoring are particularly suitable for automated installations, time and cycle-dependent clamping and unclamping.
ROEMHELD B1.470 Threaded Body Cylinder: double acting.
These double-acting cylinders allow a space saving installation into the fixture body and therefore a hose free oil supply. The double-wiper protects the piston and enables sealing with very little leakage. Sealing of the cylinders in the fit hole is made by two O-ring/support-ring combinations.
Secure Grip Spreading
Secure grip spreaders are likely to be suitable, if the flange you are working on has no access gap between the flanges or if you are concerned about damaging the flange faces or the flange joint, or if the flange join has a spacer, wafer or butterfly valve positioned between the flanges.
LGH-Series, Hydraulic Lock-Grip Pullers ensure a secure, safe and easy operation due to the 'Lock-on jaws'.
Capacity: 10 - 64 ton
Max. Reach: 215 - 408 mm
Spread Range: 300 - 660 mm
Max. Pressure: 700 bar
Pressure reducing sandwich plate pilot operated valve Z3DR 10 V
ROEMHELD B1.9471 Threaded-Body Work Supports: with metallic wiper edge, double acting
The support plunger is hydraulically extended and retracted by means of a small double-acting cylinder. Contact to the workpiece is made by spring force. The pressure can be easily exchanged. Locking of the support plunger through the slotted clamping sleeve is made by means of a ringshaped conical hydraulic piston where the locking force is transmitted by a low-friction ball shell. Unlocking of the support plunger is made by spring force.
Our team have over 35 years in the business, and experience in many industrial sectors. From design and project management, to refurbishment and repair, they can provide the solutions you need.
