Roemheld (15)

ROEMHELD C 2.320 Manually Operated Directional Control Valve ND 4

• Port size: G 1/4
• Adm. flow rate: 8 l/min
• Hydraulic oil: HLP 22
• Angle of rotation: 90º
• Operating torque: 0.63 Nm
• Manually Operated
• Maximum operating pressure: 500 bar

ROEMHELD MC 100 ZH Compact design Clamping System, ideal for us on 5-axis machining centres and pallet systems

• Size: 100 mm
• Max. clamping force: 20 kN at 200 bar
• Clamping stroke: 50 mm

ROEMHELD MC 60 H Compact design Clamping System, ideal for us on pallet-systems and 5-axis machining centres with small working areas.

• Size: 60 mm
• Max. clamping force: 15 kN at 260 bar

ROEMHELD MC Series for 5-aixs Machining. Compact design enables machining of the workpiece from all sides and ensures collision-free tool paths, ideal for use on 5-axis machining centres and pallet systems

ROEMHELD WS 5.4501 - Workholding Systems MC-P, Clamping Against the Fixed Jaw

• Jaw widths: 40, 60, 100 and 125 mm

Max. clamping force:

• MC-P 40:   7,5 kN at  23 Nm
• MC-P 60:    15 kN at  50 Nm
• MC-P 100:  25 kN at  80 Nm
• MC-P 125:  35 kN at 200 Nm

ROEMHELD WS 5.4503 - Workholding Systems MC-P Z Balance, Position Flexible

max. clamping force:

• MC-P 60 ZB:   15 kN at  50 Nm
• MC-P 100 ZB: 25 kN at  80 Nm
• MC-P 125 ZB: 35 kN at 200 Nm

ROEMHELD WS 5.4502 - Workholding Systems MC-P Z, Concentric Clamping mechanically or hydraulically operated

• Jaw widths: 40, 60, 100 and 125 mm

ROEMHELD WS 5.3586 - MC125 Compact design mechanical workholding systems that allow good accessability of tools to the workpiece

max. clamping force:

• MC 125: 35 kN at 200 Nm

ROEMHELD M8.300 Mechanical Clamping Modules with Univeral Clamping Plate

• Max. clamping force: 6 kN
• Max. clamping stroke: 2 mm
• Max. clamping force: 10 kN
• Max. clamping stroke: 1.5 mm

HILMA WZ 6.2275 Clamping Nut, Mechanical with blind hole thread, without clamping force display

• T-slot DIN 650: 18 - 42 mm
• Clamping force: 60 - 200 kN
• Max. tightening torque: 25 - 90 Nm

HILMA WZ 6.2273 Mechanical Clamping Nut with through-hole and clamping force display for the clamping and locking of dies.

• T-slot DIN 650: 28 mm
• clamping force: 100 kN

Hilma WZ 6.2274 Mechanical Clamping Nut with through-hole thread and clamping force display for the clamping and locking of dies on press bed and ram.

• T-slot DIN 650: 14 - 42 mm
• Clamping force: 60 - 180 kN
• Max. tightening torque: 30 - 110 Nm