Carr Lane

• OD - 3/8"
• ID RANGE - .1929 - .2283"
• Imperial sizes with a variety of lengths.

• OD - 5/16"
• ID RANGE - .1250 - .1935"
• Imperial sizes available with a variety of Lengths

Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.

• OD - 1/4"
• ID RANGE - .0980 - .1406"
• Imperial sizes available with a variety of Lengths

These precision locating pins feature a chamfered tip for effortless part loading and a shoulder that helps resist downward forces. Typically, one Round Pin and one Diamond Pin are used together to locate two machined holes in a workpiece or to align two fixture components without causing binding.  The head and shank diameters of the round locating pins are concentric to within .0005" TIR. These pins are available with head diameters ranging from 1/4" to 1" (6 to 20mm in metric).

• Head Diameter: 1/4 - 1 or 6mm - 20mm
• Metric and Imperial sizes
• Round and Diamond pins

Carr Lane’s highly durable standard clamping studs are designed to be used with a T nut or to be directly installed into a fixture plate. These are available in both steel and stainless-steel variants with thread sizes ranging from 1/4-20 to 1"-8 (M6 to M20 in metric). A wide range of lengths are available for these clamping studs.

• Steel or stainless steel variants
• thread sizes ranging from 1/4-20 to 1"-8 (M6 to M20 in metric)

The original safety-engineered Hoist Ring, with a choice of Standard or Long Ring

• Load Rating: 550 - 110,000 (lbs)
• Installation Torque: 5 - 7150 (lbs)
• Long-ring version provides extra reach and allows using larger lifting hooks

The heavy-duty levelling assembly consists of a radius-head screw, a tapped plate, and a hex nut, designed for durability and reliable performance. It is available in a wide range of thread sizes, from 3/8"-16 to 1"-8, as well as metric options ranging from M10 to M24, ensuring compatibility with various applications and needs.

• Thread: 3/8-16 - 1-8 or M10 - M24
• Metric and Imperial sizes
• Mild Steel, Black Oxide Finish

 Carr Lane Push/pull toggle clamps are designed with a sliding plunger to allow the clamping action to occur in a straight-line. The plungers on these clamps can be secured in either the pushing or pulling direction by moving the toggle. The push/pull toggle clamps are offer in several variations such as the standard SPC series, horizontal handled, PC series and threaded body variants. Each variation of the push/pull toggle clamp provides different features and holding capacities. These are available in both metric and imperial sizes in both steel and stainless steel.

• Available in steel and stainless steel
• Available in metric and imperial
• Several variations available

The precision height locator features a counterbored hole for mounting with a socket-head cap screw (sold separately). Jig Rest Buttons are ideal for use as supports, side locator pads, and jig feet. These buttons can also be stacked to reach greater heights. They are available in outside diameters ranging from 1/2 to 1-1/4", with various height options to choose from.

• Metric and Imperial sizes
• Steel Black Oxide Finish

These Carr Lane pull handles have a modern design handle that offers a comfortable grip with ergonomic features. These handles are available in both rounded or squared design options as well as a range of materials such s thermoplastic, aluminium and stainless steel. Options of metric and imperial sizing are available for this range.

• Metric and Imperial sizes available
• Square and Rounded designs
• Thermoplastic, Aluminium and Stainless Steel options

The speed handles are designed with added weight for rapid turning as well as a long arm extension fitted to offer superior leverage for hand tightening. Available in two sizes, each comes in either a blank or tapped-through option, with tapped-hole sizes ranging from 1/2-13 to 3/4-10 (M12 to M20 in metric).

• Double arms available in Metric & Imperial
• sizes ranging from 1/2-13 to 3/4-10
• sizes ranging from M12 to M20 in metric 

 These Hand-retractable plungers feature a locking mechanism that secures it in the retracted position. To lock the plunger, simply pull the ring back and twist it 90°. It has a slight taper for easy alignment during use. The threaded-stud version shown here is compatible with nearly any type of knob handle (knob handle must be ordered separately). If desired, knob handles can be permanently fastened using thread-locking adhesive. This version is available in steel with thread sizes ranging from #10-32 to 5/8-11 (M6 to M12 in metric), and also in stainless steel with the same thread size options.

• Metric and Imperial sizes available
• Steel and Stainless Steel
• Thread - #10-32 - 5/8-11 or M6 - M12