Angular clamp with T-slot Adaptor
HILMA WZ 3.2206 Single-Acting Angular Clamp with T-Slot Adaptor used for clamping and locking on machines and plants, suitable where space is limited
- Max. clamping force: 40 .. 110 kN
- For T-slot: 18, 22, 28 and 36 mm
- Clamping stroke: 2.5 .. 3 mm
- Max. temperature 120°C
- Max. operating pressure: 400 bar
Angular clamp with T-slot Adaptor - HILMA WZ 3.2206
- Max. clamping force: 40 .. 110 kN
- For T-slot: 18, 22, 28 and 36 mm
- Clamping stroke: 2.5 .. 3 mm
- Max. temperature 120°C
- Max. operating pressure: 400 bar
Advantages:
- Optimum force transmission
- Compact design
- Easy mounting
- Suitable for minimum clamping edges
- T-slot 18, 22, 28 and 36 mm are available
- Total stroke 5.5 – 6 mm
- Die standardisation with regard to the width and depth is not required
- Easy to retrofit
Application:
Angular clamps are used for clamping and locking on machines and plants, on press bed and ram. Due to the manageable and rounded design, angular clamps are especially suitable where space is limited and with small clamping edges. The use is possible at ambient temperatures up to a maximum of 120 °C.
Description:
The angular clamp is manually placed in the T-slots provided in press ram or bed. Clamping on the die clamping edge by the application of hydraulic pressure to the piston and unclamping by spring force. The clamping block can also be directly screwed without T-slot adapter and can be ordered separately.
If you can’t find what you are looking for, need product pricing, delivery, technical support or associated services CONTACT HYQUIP or call our sales office +44 (0)1204 699959
| Quantity | Unit discount | You Save |
|---|