Short-stroke Hollow Piston Cylinder
HILMA WZ 2.1330 Short-stroke Hollow Piston Cylinder, used in connection with tie rods and sceews for clamping and locking dies
- Max. clamping force: 22 - 54 kN
- Clamping stroke: 2.5 - 3 mm
- Spring force: 0.27 - 0.67 kN
- Piston area: 5.5 - 13.5 cm²
- Fixing screw: M12 - M16
Short-stroke Hollow Piston Cylinder - HILMA WZ 2.1330
- Max. clamping force: 22 - 54 kN
- Clamping stroke: 2.5 - 3 mm
- Spring force: 0.27 - 0.67 kN
- Piston area: 5.5 - 13.5 cm²
- Fixing screw: M12 - M16
Special features:
- Flat and compact design
- Steady piston movement
- Stroke limited even with max. working pressure
- Rapid and easy retrofit
- Ideal power transmission
Application:
In connection with tie rods, lead screws and threaded rods, for clamping and locking dies on presses and machines
Hollow piston cylinder, single-acting, as a pulling or pressing cylinder
This cylinder is very suitable for clamping mechanical clamping bars on die bending presses and folding presses. The clamping force is built up by applying pressure to the piston and the piston is returned by a spring which is installed in the clamping bar. The piston is provided with a through hole and is hardened and ground. For an optimum adaptation to the clamping surface, the hollow piston cylinder may be provided with a with a spherical washer.
If you can’t find what you are looking for, need product pricing, delivery, technical support or associated services CONTACT HYQUIP or call our sales office +44 (0)1204 699959
| Quantity | Unit discount | You Save |
|---|