Wedge Clamps for Tapered Clamping Edge with Cooling Circuit for Temperatures up to 250 °C
HILMA WZ 2.2410 Wedge Clamps for Tapered Clamping Edge double acting, max. clamping force 100 to 630 kN, with cooling circuit for temperatures up to 250 °C
- Max. clamping force: 100 .. 630 kN
- Operating pressure: 200 .. 350 bar
- Valve voltage: 24 VDC
- Max. temperature: 100 °C
Wedge Clamps for Tapered Clamping Edge with Cooling Circuit for Temperatures up to 250 °C - HILMA WZ 2.2410
- Max. clamping force: 100 .. 630 kN
- Operating pressure: 200 .. 350 bar
- Valve voltage: 24 VDC
- Max. temperature: 100 °C
Advantages:
- Safe clamping of moulds/dies with tapered clamping edge
- Temperatures up to 250°C with integrated cooling circuit
- High operational safety by automatic motion sequence
- Very sturdy design
- High safety standard
- Long service life
- Block cylinders can be retrofitted
Application:
Double-acting wedge clamp for clamping moulds and dies on a press bed or ram or in injection moulding machines, machines and installations.
Description:
The wedge clamp consists of a hydraulic block cylinder and a piston guided in a housing. The clamping bolt is provided with 20° bevel to clamp on the tapered clamping surface of the mould/die. Based on the internal design of the wedge clamp and the 20° bevel of the clamping bolt, the system is providing internal friction.
Cooling circuit:
In addition, there is a cooling circuit for oil cooling in the block cylinder. This cooling circuit guarantees a steady temperature at the sealing surfaces of the hydraulic supply. When dimensioning the cooling circuit, the occurring temperatures and the admissible temperature at the clamping element must be considered.
If you can’t find what you are looking for, need product pricing, delivery, technical support or associated services CONTACT HYQUIP or call our sales office +44 (0)1204 699959
| Quantity | Unit discount | You Save |
|---|