Hydac Water Test Kit WTK

Hydac Water Test Kit WTK

• Measurement range can be selected: 0.02 ... 1 %; 0 ... 10% and 100 ... 3000 ppm
• Time per measurement: only approximately 2 minutes (without sample preparation)
• Plastic housing lightweight, impact-proof and chemical-resistant
• Pressure sensor easily cleaned, high measurement accuracy
• High resolution in the lower measurement range
• Battery replaceable
• Display illuminated
• Display texts in many languages
• Not a hazardous material

Items supplied:

• 1 x aluminium case (W 340mm x H 275mm x D 140mm)
• 1 x measurement cell
• 1 x bottle containing reagent A (500 ml)
• 25 x gel sachet containing reagent B
• 1 x measuring beaker (100 ml)
• 1 x plastic tweezers
• 3 x agitator (in plastic case)
• 10 x syringe 1 ml
• 3 x syringe 5 ml
• 1 x test kit cleaner (250 ml)
• 1 x operating and maintenance manual

Replacement pack, consisting of consumables sufficient for 50 tests, can be ordered separately.

General Function:

The Water Test Kit is used to determine the water content in volume percent in mineral and lubricating oils. Simply adding 2 reagents to the contaminated oil causes an increase in pressure in the measuring cell. This pressure increase is output via the digital display as water content in vol% or ppm. Time per test: approx. 5 minutes only (excluding sample preparation)

For product pricing, delivery, technical support or associated services CONTACT HYQUIP
You can also call our sales office +44 (0)1204 699959