Cookies management by TermsFeed Generator

Threaded Body Work Support M40 x 1.5

ROEMHELD B1.942 Threaded Body Work Support: M 40 x 1.5, with metallic wiper edge, single acting

  • Maximum operating pressure 500 bar
  • External thread: M40
  • Maximum load force: 15 - 20 kN
  • Plunger diameter: 20 mm
  • Plunger stroke: 10 - 15 mm
  • Maximum flow rate: 25 cm³/s
  • Elastic deformation: 2.7 µm/kN
Print page

Products
Downloads
Description
Part Number Material Number Stroke Type Admissible Load Force (kN) Price Add to Parts List
1941-201 1941-201 10mm Plunger Extended, Extend and Contact with Air Pressure 15 £310.59
£372.71 Inc. VAT
1942-201 1942-201 10mm Plunger Retracted, Extend with Hydraulics, Contact with Spring Force 15 £367.71
£441.25 Inc. VAT
1940-201 1940-201 10mm Plunger Extended, Contact with Spring Force 15 £293.93
£352.72 Inc. VAT
B1942 en 0315
B1942_en_0315

Threaded Body Work Support with Metallic Wiper Edge M40 x 1.5 - ROEMHELD B1.942

  • Max. operating pressure 500 bar
  • External thread: M40
  • Max. load force: 15 - 20 kN
  • Plunger diameter: 20 mm
  • Plunger stroke: 10 - 15 mm
  • Max. flow rate: 25 cm³/s
  • Elastic deformation: 2.7 µm/kN

Advantages:

  • Space-saving threaded-body version
  • 3 types of operation
  • Contact force by spring or pneumatically adju stable (1941-201)
  • Load force up to 15 kN
  • Metallic wiper edge and FKM wiper
  • Venting of the spring area
  • Connection of positive air pressure protection is possible
  • Mounting body as accessory

Application:

Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the workpiece surface irregularities, also vibration and deflection under machining loads. The threaded-body design allows for spacesaving and direct installation into the fixture body. Oil supply is made through drilled channels.

Description:

In the body of the threaded-body work support a thin-walled locking bush is integrated, which locks cylindrically around the freely-movable support plunger when pressurising the element with hydraulic oil. For contact of the support plunger at the workpiece there are 3 possibilities:

  1. Spring force
  2. Air pressure advanced
  3. Oil pressure combined with spring force

The elements are protected against penetration of swarf by a metallic wiper edge and sealed against liquids. The venting port allows also the connection of air sealing. A mounting body for pipe threads or drilled channels is available as accessory.

Quantity Unit discount You Save