Carr Lane (14)

Locking L Pins and T Pins are available as complete assembly, L or T pin only and bushing only. They have precision-ground pin diameter to ensure accurate hole alignment. Locking L Pins and T Pins are removable locating pins with a durable construction, each featuring a handle end with a small hole for attaching an optional cable. These pins come in a variety of diameters and lengths. Locking L Pins and T Pins with a lock screw that securely holds bushings in place. These pins are available in both imperial and metric sizes

Carr Lane locking-pin bushings are compatible with Locking L Pins, Locking T Pins and Locking Clamping Pins. They are equipped with a retainer spring clip on the inside diameter, and is compatible with all types of locking pins and locating screws. These precision bushings are designed to be press-fitted into a standard reamed hole and can be securely fastened with a lock screw to ensure the bushing remains in place.

• Available in Metric and Imperial sizes
• Available in sizes from 3/16" - 1/2" (6mm-12mm)

Carr Lane Lock screws can be used on either the "slip" side or the "fixed" side of a slip/fixed renewable bushing. Lockscrews are the most popular locking device for renewable drill bushings. These Lockscrews are designed and manufactured to be simple, strong, compact, and economical. Carr Lane lockscrews are available in a wide variety of sizes to accommodate renewable bushings ranging from 3/16" to 5" body diameter. TW series also available for thin-wall bushings. These Lockscrews are now only available in packs of 5.

• Available in metric and imperial sizes
• Only available in packs of 5

This spring-loaded work support features an extra low profile, making it perfect for use in tight, hard-to-reach spaces, with the handle adjustable for easy access. Turning the handle counterclockwise unlocks the plunger, allowing it to float, while turning it clockwise locks the plunger in place. For easier loading of lighter parts, the plunger can be locked in the retracted position before loading. The adjustable handle can be repositioned to any angle for optimal leverage. Manual work supports are offered in three sizes, with options for either inch or metric threaded plungers.

• Imperial and Metric sizes available
• Thread - 5/16-18 - 5/8-11 or M8 - M16

Carr Lane Marine ball lock pins are available in three variations including: button handle, recessed button handle and ring handle. This range is only available in stainless steel to provide extra protection from corrosion in marine environments. Ball lock pins are high-strength, quick-release alignment pins with a precision ground shank. These are available in pin diameters from 3/16 to 3/4" (5 to 16mm in metric).Pins with special grip lengths up to 12” (300mm) and other special features can be made to order.  If you wish to configure your own marine ball lock pins do not hesitate to contact our sales team.

• Choice of three handle styles: Buttons, Recessed Button and Ring
• Shank diameters from 3/16 to 3/4” (5 to 16mm in metric), each available in a choice of several standard grip lengths
• Available from stock only in the standard grip lengths listed below (other grip length available as specials)

Marine detent pins are quick-release pins used in applications where grip length isn't important. These alignment pins are are equipped with a on spring-loaded locking ball and has a ring rather than a solid shoulder. They are made to withstand extra corrosion resistance therefore are made of 316 stainless steel. The locking balls use spring force to lock the pin in place and doesn't use positive locking like a ball lock pin. Using these detent pins is easy, simply push the pin to insert and pull to remove.

• Nominal shank dia: 3/16" - 1/2"
• Grip lengths (inches): 0.50 to 4.00
• Shank diameters from 3/16” to 1/2”, each available in a choice of several standard grip lengths

Carr Lane Liner bushings are permanently installed bushings used to hold renewable drill bushings. The inner diameter of the liner has an exact sliding tolerance with the outer diameter of the replaceable bushing. This arrangement ensures the correct positioning of the replaceable bushing and shields the jig plate from damage and wear caused by regular bushing changes. The "length" specified for an HL bushing refers to its total length, not the portion beneath the head. These are available in both ground and unground options.

• OD - 12mm - 125mm
• ID RANGE - 8mm - 105mm
• Metric sizes with a variety of lengths

Carr Lane’s mill fixture keys are detachable fixture keys designed to fit into a 7/8" reamed hole. It accommodates two table-slot sizes (11/16" and 13/16") with a simple 90° rotation. The keys can be removed before machining, once the fixture is securely attached. The crossholes on the top simplify insertion and removal. Offers concentricity within .0005" TIR. Available in two lengths: standard or extra-long.

Carr lane miniature stainless steel slotted-heel clamp straps are equipped with a radius nose to provide firm workpiece contact. These clamp straps feature a slot underneath to slide straight back for easy loading. These are available to accommodate stud sizes ranging from #10-32 to 3/8-16, each in a choice of strap lengths. This clamp strap can be ordered individually or in a complete clamp assembly. The available assemblies are assembly with flange nut, assembly with spherical nut & washer, assembly with knurled knob and assembly with knurled knob & spherical washer.

• Thread - #10-32 - 3/8-16
• Length - 1-1/2 - 4
• Internal Diameter - 21/32 - 1-13/16
• Available with four assembly options to chose from

Carr Lane’s custom hammers and industrial hand tools are built to fulfil any tooling requirement. These customisable hammers are available in various sizes, by choosing the hammer inserts that best fit your specific application. Carr Lane’s custom hammers are available in a range of handle materials, such as wood, fiberglass, and steel. Carr Lane’s no-rebound hammers, also known as dead blow hammers, provide maximum impact and deliver 50% more force than standard hammers. Their design features specialized steel pellets that transfer momentum directly to the impact point.

Carr Lane one-touch quick acting swing clamps are available in three variations including vertical cam handle, hex drive and horizontal cam lever. One-Touch Swing Clamps are manually operated clamps that first rotate exactly 70° clockwise into position then clamp straight down in one continuous motion. Each variant has different clamp sizes that apply a range of different maximum clamping forces.

• All clamp types available in four sizes
• Available in hex drive, vertical cam handle , horizontal cam lever variants

Durable multi-purpose knobs in Oval and Oval Tapered designs. Oval tapered knobs are Attractive design knobs also suitable for control levers and push pull rods, with moulded-in brass insert providing superior thread strength. The solid-plastic through hole version can be used with a shoulder screw as a revolving crank handle. Oval knobs are Comfortable-grip ball knobs that are ideal for shift levers, control levers and push pull rods, with moulded-in brass insert providing superior thread strength.

• Available in Phenolic plastic
• Choice of four knob sizes