Carr Lane (17)

Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.

• OD - 7/8"
• ID RANGE - .4921 - .7500"
• Imperial sizes available with a variety of Lengths

Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.

• OD - 9/16"
• ID RANGE - .2950 - .3438"
• Imperial sizes available with a variety of Lengths

Slotted Locator Bushings are compatible with various alignment and locating pins to align two holes without binding. These precision bushings feature a tight tolerance in one direction and full relief in the perpendicular direction. The headed version offers increased resistance to axial loads, with the head either left exposed or recessed by counterboring the installation hole. Available for pin diameters ranging from 3/16" to 1/2". An optional version in hardened 440C stainless steel is also available.

• OD - 4mm - 125mm
• ID RANGE - .35 - 95.00mm
• Metric sizes available with a variety of Lengths

Three and Four Prong Knobs, provide strong grip for clamping and other applications that require quick tightening and high torque

• Metric and Imperial sizes
• Thread: 1/4-20 - 1/2-13 or M6 - M10
• Available in Phenolic or Thermplastic

These Carr Lane pull handles have a modern design handle that offers a comfortable grip with ergonomic features. These handles are available in both rounded or squared design options as well as a range of materials such s thermoplastic, aluminium and stainless steel. Options of metric and imperial sizing are available for this range.

• Metric and Imperial sizes available
• Square and Rounded designs
• Thermoplastic, Aluminium and Stainless Steel options

Durable multi-purpose Pull Knobs are versatile with an enlarged head designed for pulling, lifting and pushing, manufactured with a moulded in brass insert for superior thread strength. Available in phenolic plastic  in both metric and imperial sizes to fit the needs of any application.

• Choice of three types, in two sizes each.
• Available in Phenolic Plastic.

These Hand-retractable plungers feature a locking mechanism that secures it in the retracted position. The pull ring enables fast activation and can be tucked away when not in use. To lock the plunger, simply pull the ring back and twist it 90°. Available in thread sizes ranging from 1/4-20 to 1/2-13 and offered in both steel and stainless steel.

The extended locking pull ring hand-retractable plunger distinctive, quick-release pull pin securely locks in the extended position. The plunger tip is designed to retract manually, locking automatically in the forward position without relying on spring tension.  It has a slight taper for easy alignment during use.

• Locking, Non-Locking and Extended Locking options available
• Available in steel and stainless steel

 Carr Lane Push/pull toggle clamps are designed with a sliding plunger to allow the clamping action to occur in a straight-line. The plungers on these clamps can be secured in either the pushing or pulling direction by moving the toggle. The push/pull toggle clamps are offer in several variations such as the standard SPC series, horizontal handled, PC series and threaded body variants. Each variation of the push/pull toggle clamp provides different features and holding capacities. These are available in both metric and imperial sizes in both steel and stainless steel.

• Available in steel and stainless steel
• Available in metric and imperial
• Several variations available

Quick-acting four-prong knob that slides in and out of clamping position, ideal when the knob must be completely removed for loading

• Metric and Imperial sizes
• Thread - 1/4-20 - 5/8-11 OR M6 - M16

This fast-acting knob slides in and out of the clamping position, perfect for situations where complete removal of the knob is necessary for loading. To engage, tilt the knob to slide it in, then straighten to align the threads and tighten. For removal, simply loosen the knob and tilt it to slide out. Available in tapped-hole sizes ranging from #10-24 to 1/2-13 (M5 to M12 metric).

• Metric and Imperial sizes
• Steel Black Oxide Finish
• Thread: #10-24 - 1/2-13 or M5 - M12