Each of these Carr Lane reamed-hole fixture keys can accommodate two different table-slot sizes by rotating 90°. They should be installed in a standard 5/8" reamed hole with a concentricity of .0005" TIR or better. Secure them from below using a 1/4-20 socket-head cap screw through the counterbored hole, or from above with a 5/16-18 socket-head cap screw.
Carr Lane replacement pads are offered as a replacement or optional pads for clamp straps. These replacement pads are available in 3 different materials including steel, reinforced plastic and brass.
The precision height locator features a tightly fitting shank, designed for installation in a reamed hole. Rest buttons serve as versatile supports, side locator pads, and jig feet. They are offered in head diameters ranging from 3/8" to 1-1/4" (10mm to 20mm in metric), with various height options available. These rest buttons are available in both steel and stainless steel options.
Full Range of Carr Lane Revolving Handles including square design, foldable and revolving ball handle, made from Phenolic Plastic with Steel Body and Thermoplastic Stainless Steel Body
Rotary T Nuts can be inserted from the top of a T-slot, unlike standard T Nuts, which must be inserted from the end of the slot. This feature enables you to add T Nuts and studs anywhere on the table without disrupting existing setups. This 40-piece set includes a full range of stud lengths along with matching Rotary T Nuts, Flange Nuts, and Coupling Nuts. It is available to fit table-slot sizes from 1/2" to 1" (14 to 20mm metric) and thread sizes ranging from 3/8-16 to 3/4-10 (M10 to M16 metric).
Each set includes:
Rotary T Nuts can be inserted from the top of a T-slot, unlike standard T Nuts, which must be inserted from the end of the slot. This feature enables you to add T Nuts and studs anywhere on the table without disrupting existing setups. These items are manufactured from alloy steel to provide maximum strength and are available to accommodate table-slot sizes from 1/2 to 1" (14 to 20mm in metric), in thread sizes from 3/8-16 to 3/4-10 (M10 to M16 in metric).
These precision locating pins feature a chamfered tip for effortless part loading and a shoulder that helps resist downward forces. Typically, one Round Pin and one Diamond Pin are used together to locate two machined holes in a workpiece or to align two fixture components without causing binding. The head and shank diameters of the round locating pins are concentric to within .0005" TIR. These pins are available with head diameters ranging from 1/4" to 1" (6 to 20mm in metric).
Made from durable, replaceable inserts that, when installed to a fixture, enhance both holding power and wear resistance. Instead of relying solely on static friction, they are engineered to make slight indentations in the workpiece, significantly increasing gripping force. These round grippers are available in a broad range of materials and finishes best designed to fit the needs of your application. Some of these include hardened tool steel, carbide tipped, solid carbide, abrasive diamond, bonded urethane and Delrin. Available in Metric and imperial and a range of sizes.
The forged base rotates 360°, while the solid-loop forged ring pivots 180°, enabling lifting from any direction. Designed with a safety factor of 5:1, it comes with a high-strength shoulder screw. Available in inch or metric threads, with load capacities up to 2,500 lbs.
The threaded rest button features a hex head and is precision-machined to be .005 to .010" over the nominal height, allowing for finish grinding after installation. Screw rest buttons are ideal for use as supports and jig feet. They are available in thread sizes ranging from 1/4-20 to 1/2-13 (M6 to M12 in metric), with various height options to choose from.
This precision height locator features a threaded shank for easy installation into a tapped hole. Its cone shape offers a minimal contact area while ensuring a large, stable base. Screw Rest Pads are highly versatile, serving as supports, side locator pads, and jig feet. They are available in thread sizes ranging from 5/16-18 to 5/8-11 (M8 to M16 metric) and come in various support heights up to 2" (50mm metric).
Due to their self-retaining design, these press-fit ball plungers can be easily installed into a standard drilled hole. The slotted end of the thermoplastic body expands to compensate hole tolerances of up to .008" oversize. The sturdy shoulder ensures a secure seating position and effectively resists detent force. The installation hole can be counterbored to accommodate the shoulder. They are available in four sizes, from 3/16 to 1" diameter.
