High-strength stranded wire cable with a green nylon coatin and a choice of four cable diameters
Cable Rings allow attaching Cable Assemblies to a diameter or radial groove and can be used with cable sizes #1, #2, and #3
Cable Tabs attach to our nylon-coated cable, to allow attaching the end with a screw, available in teardrop and rectangular shape
Carr lane cam edge clamps are offered with either a fixed base or slotted base. Option between counter clockwise or clockwise movement to the clamp. These are Available in two sizes, with 5/16-18 or 1/2-13 mounting screws (M8 or M12 in metric). These are available in both metric and imperial sizing.
Cam handle expanding pins are alignment pins that expand to offer the highest tolerance alignment of two holes possible. Created with female split bushings separated by males segments formed on centre spindle, that is allowed to expand when it is drawn together. They are available in standard pin diameters from 1/4" to 3/4" in various available lengths.
Carr Lane cam handles are designed for use with an Eye Bolt or a custom-made drawbar. The continuous-rise spiral cam locks firmly in place at any position. It is available to fit Eye Bolt sizes ranging from 1/4-20 to 3/4-10 (M6 to M20 in metric).
Similar to a standard Jig Pin, except that the pin body is positively retained in a locking bushing. In fully retracted position, the bushing's spring clip snaps into the pin's groove, holding the pin fully retracted by spring force and positively preventing removal.Spring pressure also holds the pin in intermediate extended positions, an advantage especially if the fixture is turned upside down. Like standard Jig Pins, Captive Jig pins have an integral shoulder to keep the handle raised.
Captive Locating Screws can be used for locating and clamping, or for clamping only, by selecting the appropriate screw length. The locating screw's precision-ground body is positively retained in a locking bushing and in fully retracted position, the bushing's spring clip snaps into the body's radial groove, holding the fully retracted screw by spring force and positively prevents removal. Spring pressure also holds the screw in intermediate extended positions, an advantage especially if the fixture is turned upside down. Available in thread sizes from 1/4-20 to 1/2-13.Locking-Pin Bushings are designed to press fit in a standard reamed hole. Secure with the included Lock screw to positively hold the bushing in place. Shorter or longer bushings are available in most sizes, for thinner or thicker plates.
Carr lanes clamp rests offer rear support for slotted heel clamp straps. The steel variants are equipped with a hex head to allow adjustment and is furnished with a jam nut. The stainless-steel variant is manufactured with a drilled to accommodate a rod to allow turning. Each of these variants are available in various sizes. Carr lane clamp rest screws available in thread sizes 3/8-16 and 1/2-13, each in a choice of three lengths.
Carr Lane’s clamp springs are designed to hold up a clamp strap for clear part loading. These springs are available in steel to accommodate stud sizes from 1/4-20 to 3/4-10 (M6 to M20 in metric), and in stainless steel to fit stud sizes from #10-32 to 3/8-16 (M5 to M10 in metric).
Carr Lane clamping kits feature a diverse selection of step blocks and step clamps. These kits contain a wide assortment of step clamps and blocks manufactured with high quality steel and are offered in both standard and high-rise block variants. This 52-piece set comes complete with a full range of stud lengths, along with corresponding T nuts, flange nuts, and coupling nuts. Available in several variations to fit different slot sizes and offer a range of thread sizes.
Depending on extended screw length, these threaded alignment pins can be used for clamping and locating, or clamping only. The clamping bushing is made separate from the pin, and is required to be welded in place at the proper length to fit the application. These are available in thread sizes from #10-32 to 1/2-13 (M6 to M12 in metric)
