Cookies management by TermsFeed Generator

Hydac "S" Type Suction Strainer

"S" Type Suction Strainer (Filter Element)

  • Filtration: 125µm or 75µm
  • Filter Sizes: 0015 / 0025 / 0050 / 0100 / 0180
  • Connection Sizes: G1/2" / G3/4" / G1" / G11/2" / G2"
  • With or without bypass valve 

HYDAC "S" Type Suction Strainer filter elements, available in 125 µm or 75 µm ratings and multiple sizes (0015 to 0180), are designed for direct installation in pump suction lines to protect against large contaminants, featuring stainless steel mesh media, optional bypass valve (0.2 bar), and durable construction for flow rates up to 300 l/min in operating temperatures from -10 °C to +100 °C.

Print page

Products
Downloads
Description
Part Number Material Number Nominal Size Filtration Rating Bypass Valve Price Add to Parts List
0015 S 075 W 0015S075W 1251182 15 075um Without £26.34
£31.61 Inc. VAT
0015 S 125 W 0015S125W 1251189 15 125um Without £26.34
£31.61 Inc. VAT
0015 S 075 W /-B0.2 0015S075W/-B0.2 1251183 15 075um With £26.34
£31.61 Inc. VAT
0015 S 125 W /-B0.2 0015S125W/-B0.2 1251190 15 125um With £26.34
£31.61 Inc. VAT
0025 S 075 W 0025S075W 1251203 25 075um Without £32.44
£38.93 Inc. VAT
0025 S 125 W 0025S125W 1251205 25 125um Without £32.44
£38.93 Inc. VAT
0025 S 075 W /-B0.2 0025S075W/-B0.2 1251204 25 075um With £43.52
£52.22 Inc. VAT
0025 S 125 W /-B0.2 0025S125W/-B0.2 1251206 25 125um With £43.52
£52.22 Inc. VAT
0050 S 125 W /-B0.2 0050S125W/-B0.2 1251194 50 125um With £44.99
£53.99 Inc. VAT
0050 S 100 W 0050S100W 1274386 50 100um Without £50.07
£60.08 Inc. VAT
0050 S 075 W 0050S075W 1251191 50 075um Without £35.61
£42.73 Inc. VAT
0050 S 125 W 0050S125W 1251193 50 125um Without £35.61
£42.73 Inc. VAT
0050 S 075 W /-B0.2 0050S075W/-B0.2 1251192 50 075um With £44.99
£53.99 Inc. VAT
0100 S 075 W 0100S075W 1251195 100 075um Without £61.83
£74.20 Inc. VAT
0100 S 125 W 0100S125W 1251197 100 125um Without £61.83
£74.20 Inc. VAT
0100 S 075 W /-B0.2 0100S075W/-B0.2 1251196 100 075um With £84.10
£100.92 Inc. VAT
0100 S 125 W /-B0.2 0100S125W/-B0.2 1251198 100 125um With £84.10
£100.92 Inc. VAT
0180 S 125 W /-B0.2 0180S125W/-B0.2 1251202 180 125um With £106.26
£127.51 Inc. VAT
0180 S 075 W 0180S075W 1251199 180 075um Without £84.78
£101.74 Inc. VAT
0180 S 125 W 0180S125W 1251201 180 125um Without £84.78
£101.74 Inc. VAT
0180 S 075 W /-B0.2 0180S075W/-B0.2 1251200 180 075um With £106.26
£127.51 Inc. VAT
Hydac "S" Type Suction Strainer

"S" Type Suction Strainer

  • Filtration: 125µm or 75µm
  • Filter Sizes: 0015 / 0025 / 0050 / 0100 / 0180
  • Connection Sizes: G1/2" / G3/4" / G1" / G11/2" / G2"
  • With or without bypass valve

Features:

  • Flow rate: up to 300 l/min (refer to Filter Calculation / Sizing table)
  • Operating temperature: -10°C to +100°C

General Function:

HYDAC Suction Strainer Filter Elements are designed for installation into suction lines of pumps. Caution should be taken to ensure that the suction filter elements are always mounted below the minimum oil level of the reservoir to avoid pump cavitation.

Suction strainer filter elements can be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold start. The bypass valve opens at 0.2 bar (3 psi). For best results, suction strainer elements should be sized for clean element pressure drops of no higher than 0.0034 bar (0.05 psi) to 0.0048 bar (0.07 psi). See Filter Calculation / Sizing table

HYDAC suction Strainer Filter Elements are manufactured using stainless steel wire mesh screen media, polyamide end caps, and a steel, zinc-plated central tube.

Suction strainer filter elements are only intended to protect hydraulic pumps against catastrophic failure caused by large coarse contaminant. Suction strainer elements should be inspected and replaced regularly. Suction strainer filter elements should not be used as the only filtration element in a hydraulic system. Pressure filters, return line filters and offline filters with reasonable dirt holding capacity should be considered and installed to provide system protection against component damage caused by fine contaminants.

Quantity Unit discount You Save

Customers who bought this product also bought:

Hydac "D" Type Pressure Line Filter Elements

Type "D" pressure line elements are used in the filters series DF, DFF, DFG, DFP, DFZ, DFDK, LF, MDF

  • Filtration: 1µm to 20µm
  • Filter Sizes: 0030 to 1500
  • Collapse stability: 20 bar (BN4HC), 210 bar (BH4HC)
  • Without bypass valve as standard

HYDAC "D" Type pressure line filter elements offer high-efficiency absolute filtration (3µm to 20µm), exceptional dirt-holding capacity, and robust collapse stability (up to 210 bar), making them ideal for high-pressure applications requiring reliable contamination control and low pressure drop.

Please note that there has been a conversion from Betamicron® (BN4HC / BH4HC) to Optimicron® (ON)  

£0.00 £0.00 Inc. VAT
View