Heypac Fluid Filtration

Heypac Return Line Filter

A return line filter, especially suitable for use with manifold equipped GX20, GX30 and GX40 series pumps. The filter screws into the return port (G1/2" BSPT) on the bottom face of the pump flange. It is only suitable for use with R1, R2 and 10 litre capacity reservoirs

• Filtration level: 20 micron (nominal)
• Filter material: Paper (Wire supported)
• Fluid compatibility: Mineral & lubricating oils only
• Temperature range: -10 to + 100°C
• Pressure drop: 0.06 bar at 30 lpm

Heypac GX Return Line Filters

A range of line mounted 10 micron return filters to suit GX05 to GX80 series pumps. The filter is available as a stand-alone item or in a kit, which also contains all necessary fittings to mount the filter to the pump return port.

• Maximum working pressure 14 Bar.
• Maximum flow rate 90 lpm.
• Fluids - Petroleum Based Only

Heypac KR Return Line Filters

A range of line mounted 10 micron return filters to suit KR05 to KR80 series pumps. The filter is available as a stand-alone item or in a kit, which also contains all necessary fittings to mount the filter to the pump return port.

• Maximum working pressure 14 Bar.
• Maximum flow rate 31 lpm.
• Fluids - Petroleum Based Only