Carr Lane (21)

• OD - 7/8"
• ID RANGE - .5469 - .6562"
• Imperial sizes with a variety of lengths

• OD - 9/16"
• ID RANGE - .2950 - .3438"
• Imperial sizes with a variety of lengths

• OD - 8 - 105mm
• ID RANGE - .35 - 85.00mm
• Metric sizes with a variety of lengths

Slotted Locator Bushings are compatible with various alignment and locating pins to align two holes without binding. These precision bushings feature a tight tolerance in one direction and full relief in the perpendicular direction. . Available for pin diameters ranging from 3/16" to 1/2". An optional version in hardened 440C stainless steel is also available. These are available in knurled and press fit type.

These Slotted Locator Bushings are designed for thin template jig plates ranging from 3/64" to 3/8" thick. They can be used with various alignment and locating pins to align two holes without binding. The precision bushings feature a tight tolerance in one direction and full relief in the perpendicular direction. The bushings are secured with a threaded Retainer Ring (sold separately), and the flush contact of the Retainer Ring against the jig plate ensures proper perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings are easily removable for replacement or reuse. Available for pin diameters from 3/16" to 3/4".

• A complete clamp-strap assembly using a slotted steel strap, also in this category

The Slotted-Heel Clamp Strap includes a replaceable clamping pad secured with two screws. The padded straps also accommodate custom pads or other attachments. These straps feature a slot underneath, enabling them to slide back easily for straightforward loading. Additionally, each side has a tapped hole at the rear for installing a Finger Pin. These available to accommodate stud sizes ranging from1/4-20 to 1/2-13 (M6 to M12 in metric), each in a choice of strap lengths.

• Steel and Stainless Steel miniature
• Variety of stud sizes and length

Carr Lane Slotted-Heel Gooseneck Clamp Straps are engineered to recess the clamping nut, offering a compact overall profile. These clamp straps feature a slot underneath, allowing them to slide straight back for easy loading. Each side has a rear indentation for a secure grip when retracting the clamp. The Slotted-Heel Gooseneck Clamp Straps displayed here are designed for the Standard System MF40 (1/2-13 stud size). They can be assembled into either a low or tall clamp assembly by selecting the appropriate short or long Clamping Studs and Clamp Rests.

• Metric and Imperial sizes available
• Thread - 1/2 or M12
• Length - 4.92 - 5.91

The Slotted-Heel Clamp Strap includes a replaceable clamping pad secured with two screws. The padded straps also accommodate custom pads or other attachments. These straps feature a slot underneath, enabling them to slide back easily for straightforward loading. Additionally, each side has a tapped hole at the rear for installing a Finger Pin. These available to accommodate stud sizes ranging from1/4-20 to 1/2-13 (M6 to M12 in metric), each in a choice of strap lengths. This clamp strap can be ordered individually or in a complete clamp assembly. The available assemblies are assembly with spherical nut & washer, assembly with flange nut, assembly with hand knob & spherical washer, assembly with acorn nut & spherical washer, assembly with bar knob & spherical washer and assembly with cam handle & spherical washer.

The Slotted-Heel Clamp Strap includes a replaceable clamping pad secured with two screws. The padded straps also accommodate custom pads or other attachments. These straps feature a slot underneath, enabling them to slide back easily for straightforward loading. Additionally, each side has a tapped hole at the rear for installing a Finger Pin. These are available to accommodate stud sizes ranging from 1/4-20 to 1/2-13 (M6 to M12 in metric), each in a choice of strap lengths. A complete clamp-strap assembly using a slotted-heel strap and a range of other items to complete the full assembly.

• Available in Metric and Imperial sizes
• Range of threads, lengths and internal diameters

Carr Lanes Solid handles are available in 5 different thread sizes in both metric and imperial sizes. This range offers a both stainless steel and steel options alongside various other finishes to choose from including  thermoplastic and phenolic plastic. These handles come in a selection designs each manufactured to ensure optimal performance on any application.

• Size - 1 - 5
• Metric and Imperial sizes available
• Stainless Steel and Steel
• Thread: 1/4-20 - 1/2-13 or M6 - M12

Carr Lane solid key inserts are useful for relocating a tapped or drilled hole. These inserts can be installed swiftly. Rotation of the insert is prevented by the locking keys. Solid Key Inserts are available in imperial and metric external thread sizes ranging from 5/16-18 to 1-3/8"-12 (M8-M30x2).

• Metric and Imperial sizes
• Steel and Stainless Steel
• External Thread - 5-16/18 - 1-3/8"-12 or M8 - M30x2