Carr Lane Toggle Clamp Accessories
Hex-Head Spindles - Simple spindle design provides maximum clamping force, with assembly including two jam nuts. Fully threaded for maximum adjustment range, available in thread sizes #8-32 to 5/8-11 (M4 to M16 in metric).
Spring-Loaded Spindles - Clamps with strong spring force to compensate for varying part thicknesses. Excellent for clamping castings that vary slightly in size. Assembly includes two jam nuts, a die spring and a bolt retainer. To install, weld bolt retainer to clamping arm.
Cone-Cushion Spindles - Excellent for clamping into drilled holes, slots, or corners. Molded neoprene tip provides medium clamping force with some compensation for part-size variation, also provides scratchfree clamping. Neoprene cushion has a durometer hardness of 70 shore A, and an operating temperature range of -40ºF to 220ºF. Spindle is fully threaded for maximum adjustment range. Assembly includes two jam nuts.
Swivel-Foot Spindles - Swivel foot spindle provides full contact on uneven or sloped surfaces, assembly includes two jam nuts.
Flat-Cushion Spindles - This is the standard spindle supplied with most clamps. Molded neoprene tip provides medium clamping force with some compensation for part-size variation, also provides scratchfree clamping. Neoprene cushion has a durometer hardness of 70 shore A, and an operating temperature range of -40ºF to 220ºF. Spindle is fully threaded for maximum adjustment range. Assembly includes two jam nuts.
Flat-Cushion Spindles (Quick Adjusting) - Same as the Flat-Cushion Spindles above except with two knurled nuts, instead of hex jam nuts, for convenient hand tightening. Use for quick spindle adjustment in applications where high-torque tightening with a wrench is not required.
Polyurethane Flat Cushions - Polyurethane cushions are tougher and slightly harder than standard neoprene cushions. Ideal when greater clamping force is required while still providing scratchfree clamping and some compensation for partsize variation. Molded-in stainless steel insert provides superior thread strength. Ideal for making custom-length Flat Cushion Spindles by inserting a threaded stud. Polyurethane cushion has a hardness 85 Shore A, operating temperature range 90ºF to 200ºF.
Swivel Screw Clamps - Screw clamp with patented removable, interchangeable swivel foot, available in many sizes and varieties. Add “N” to part no. for delrin foot, e.g. CL-23-SSCN. See Download Sheet for additional lengths and foot options. Order two jam nuts separately.
All specific measurements and finer details are shown on the Download Sheet
