HILMA M-TECS 240-G use advanced magnetic clamping techniques within the rubber and duroplatics processing industries
ROEMHELD Mechanically/Hydraulically or Hydraulically operated machine vice for clamping against the fixed jaw.
Max. Clamping Force:
Special hexagonal tower clamping system mechanical with fully machinable aluminium jaws
KOSTYRKA® expanding sleeves and table clamps are used for clamping turntables and dividing heads. Linear or rotary - everything is clamped
Venting of the spring area, of clamping elements and work supports
ROEMHELD L1.101 Linear actuators RA 600 industrial version with limit switch or stroke measuring system
ROEMHELD M8.301 Modulog Clamping Modules workpieces for manual assembly operations.
ROEMHELD M6.201 Floor Modules FMD for use as base frame for height adjustable working places.
ROEMHELD J7.202 Block version pneumatic swing clamp used in applications that require only low clamping forces
When pressurising the element, the clamping arm swings and lowers by 90° to the clamping position and then lowers to the clamping point. The position monitoring gives the required information regarding the position of the piston, but not regarding the position of the clamping arm.
ROEMHELD I4.111 Fixture clamp with fixed jaw max. clamping force 15 kN, jaw width 65 mm, double acting
OBSOLETE ITEM - CONTACT HYQUIP
The fixture clamp with fixed jaw consists of a very small basic body with integrated hydraulic cylinder which actuates the movable jaw. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space.
ROEMHELD H4.300 Concentric Positioning and Clamping Elements: with variable range of clamping, hydraulically operated double acting
Concentric positioning and clamping with two or three-jaw chucks on stationary fixtures is nothing new. In many applications, however, it is not possible to place the relatively large chuck bodies on the fixture. Often the smaller clamping strokes are an additional obstacle. In our development, the individual parts can be connected to a two or multiple-element version.
Our team have over 35 years in the business, and experience in many industrial sectors. From design and project management, to refurbishment and repair, they can provide the solutions you need.
