Home

 Carr Lane Push/pull toggle clamps are designed with a sliding plunger to allow the clamping action to occur in a straight-line. The plungers on these clamps can be secured in either the pushing or pulling direction by moving the toggle. The push/pull toggle clamps are offer in several variations such as the standard SPC series, horizontal handled, PC series and threaded body variants. Each variation of the push/pull toggle clamp provides different features and holding capacities. These are available in both metric and imperial sizes in both steel and stainless steel.

• Available in steel and stainless steel
• Available in metric and imperial
• Several variations available

A-Series, C-Clamp and Arbor Presses

• Capacity: 5 - 30 ton
• Max. Daylight x Width: 305 x 178 mm
• Max. Pressure: 700 bar

Range of Carr Lane Assemblies including Hand Knob, Swivel Washer and Knob Shoe avaible in a variety of sizes

• Metric and Imperial sizes
• Thread: 1/4-20 - 3/4-10 or M6 - M20

Short Spring Plungers with Extended Travel feature the same body length as a Short Spring Plunger but offer the longer stroke of a standard Spring Plunger. This self-contained plunger and spring device comes in various sizes and includes a locking element to ensure the unit stays securely in place after installation. It can be installed and adjusted from either side.

• Standard and Delrin® 
• Steel and Stainless Steel
• Available in Imperial and Metric
• A Diameter .1676 - 5/8-11 (M5-M1)

Similar to standard single-acting Ball Lock Pins, except with a heavier handle, made of solid stainless, for rough service and maximum impact strength

Carr Lane Lifting Eyes are straightforward lifting tools designed for vertical lifting aligned with the threaded bolt, ideal for single-point or two-point lifting with a spreader bar. These lifting eyes are constructed from forged steel eyebolts, featuring an integrated shoulder for enhanced strength. Available in metric and imperial thread sizes ranging from ¼-20 to 1”-8.

• Load Rating 0°: 500 - 9000 (lbs)
• Load Rating 45°: 125 - 2250 (lbs)

Type WE direct operated directional spool valves with solenoid actuation 4/3-, 4/2- or 3/2-way versions

• Size 10
• Component series 5X
• Maximum operating pressure 350 bar
• Maximum flow:  160 l/min – DC
• 120l/min - AC 

"S" Type Suction Strainer (Filter Element)

• Filtration: 125µm or 75µm
• Filter Sizes: 0015 / 0025 / 0050 / 0100 / 0180
• Connection Sizes: G1/2" / G3/4" / G1" / G11/2" / G2"
• With or without bypass valve 

HYDAC "S" Type Suction Strainer filter elements, available in 125 µm or 75 µm ratings and multiple sizes (0015 to 0180), are designed for direct installation in pump suction lines to protect against large contaminants, featuring stainless steel mesh media, optional bypass valve (0.2 bar), and durable construction for flow rates up to 300 l/min in operating temperatures from -10 °C to +100 °C.

Carr Lane solid key inserts are useful for relocating a tapped or drilled hole. These inserts can be installed swiftly. Rotation of the insert is prevented by the locking keys. Solid Key Inserts are available in imperial and metric external thread sizes ranging from 5/16-18 to 1-3/8"-12 (M8-M30x2).

• Metric and Imperial sizes
• Steel and Stainless Steel
• External Thread - 5-16/18 - 1-3/8"-12 or M8 - M30x2

Enerpac test system gauges are available in the following sizes and dimensions:

• Pressure Ranges: 0 - 3500 bar
• Face Diameters 162 - 192 mm
• Accuracy ± 0,5 - 1,5%

Enerpac TQ-Series lightweight electric torque wrench pump has been engineered with optimized flow technology to deliver up to 50% faster bolt tightening than competing pumps

• Maximum Pressure: 700 bar
• Oil Capacity: 4 litres
• Motor Size: 0.75 kW
• Flow at Rated Pressure: 0,5 l/min