Home

The HYDAC Optimicron® Pulse Filter Elements are engineered for high-pressure pulse applications, delivering absolute filtration and superior durability. Designed for systems with dynamic pressure loads, they provide reliable protection and fluid cleanliness under extreme conditions.

Key Features:

• Collapse stability ON/PS: 20 bar - OH/PS: 210 bar
• Micron ratings: 3, 5, 10, 20 µm
• Temperature range: -30 °C to +100 °C For sealing material FPM to -10 °C
• Flow direction: From outside to inside
• Category of filter element: Single use element

Enerpac PTJ, 5DA, SCJ-Series mono strand stressing tools for field-proven mono-strand tensioning

• Capacity: 20 - 30 ton
• Stroke: 216 - 254 mm
• Strand Diameters; 12,7 - 15,7 mm
• Max. Pressure; 450 - 700 bar

High-response directional valve, direct operated with integrated digital axis controller (IAC-Multi-Ethernet) for subplate mounting 4WRPDH 

• Component series 2X
• Size 6, 10
• Maximum operating pressure 350 bar
• Maximum flow 100 l/min

Directional spool valves with wet-pin DC voltage solenoids KKDER1 C/U , 3/2 direct operated

• Size 1
• Series A
• Maximum working pressure 350 bar
• Maximum flow 60 l/min

HC6D versions: 9 different intensification factors

• P_IN: 20 - 207 bar (inlet pressure)
• P_H: 800 bar maximum (outlet pressure)
• P_RETURN: As low as possible (Return pressure to tank)
• Intensification ratios: P_H = (P_IN - P_Return) i (Intensification)
• Mounting: Inline tube

ROMEHELD B1.891 Swing Clamps with Overload Protection Device: threaded-body type, single and double acting

• Maximum operating pressure 500 bar
• Maximum clamping force: 4.0 kN
• Rod diameter: 20 mm
• Piston diameter: 23 mm
• Clamping stroke: 7 mm
• Maximum flow rate: 1.5 cm³/s

This design allows the use of swing clamps even in restricted places. The threaded-body swing clamp can be sunk directly into the fixture up to the hexagon. Oil feed through two holes, allowing for 3 fitting and hose connections (see below for options).

Bosch Rexroth Axial piston variable pump A4VG series 32

• Size 28 to 125
• Nominal pressure 400 bar 
• Maximum pressure 450 bar

HC6D-D: 9 different intensification factors

• P_IN: 20–207 bar (inlet pressure)
• P_H: 800 bar maximum (outlet pressure)
• P_RETURN: As low as possible (return pressure to tank)
• P_OUTLET: P_H = (P_IN – P_Return) i (intensification)
• Mounting: Flange, Manifold system miniBOOSTER pattern

HYQUIP supply the full range of Carr Lane plain clamps step clamps and step blocks. Step Clamps feature rear serrations that are compatible with all our Step Blocks, offering superior load-bearing performance. They are designed to fit stud sizes ranging from 3/8-16 to 3/4-10 (M10 to M20 in metric) and are available in three strap length options.  Carr Lane step blocks are engineered with serrations for enhanced load capacity. They can be used in pairs as a two-piece rest block or individually with a Step Clamp. Both Step Blocks and Step Clamps feature matching serrations, ensuring maximum flexibility. Larger blocks are equipped with a finger hole for easier handling. Step Blocks are sold as pairs (one set includes two blocks). Made in the USA. Carr lane Plain Clamps are double-ended, tapered-nose strap clamps that can hold two workpieces at once or serve as rear supports when used with Step Blocks to hold a single workpiece. They fit stud sizes from 3/8-16 to 3/4-10 (M10 to M20 in metric) and are available in three strap length choices.

Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.

• OD - 2-1/4"
• ID RANGE - 1.3750 - 1.7717"
• Imperial sizes available with a variety of Lengths

The precision height locator features a tightly fitting shank, designed for installation in a reamed hole. Rest buttons serve as versatile supports, side locator pads, and jig feet. They are offered in head diameters ranging from 3/8" to 1-1/4" (10mm to 20mm in metric), with various height options available. These rest buttons are available in both steel and stainless steel options.

•  Metric and Imperial sizes
• Available in Steel and Stainless steel

These adaptable stainless-steel bars are ideal for crafting lever handles and are compatible with a broad range of knob designs. The wrench flat feature ensures a secure grip for tightening. They are suitable for use with both our single and triple hubs. This range offers a choice of 3 bar diameters each available in several lengths:

• Size 1: .39 dia with 5/16-18 threads
• Size 2: .47 dia with 3/8-16 threads
• Size 3: .55" dia with 1/2-13 threads
• Polished Stainless Steel