Home

Directional control valves, pilot-operated, with electrical position feedback and integrated electronics (OBE) Type 4WRTE

• Size 10 … 35
• Component series 4X
• Maximum operating pressure 350 bar
• Rated flow 25 … 1000 l/min

Proportional directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE) Type 4WREE

• Size 10
• Component series 3X
• Maximum operating pressure 350 bar
• Maximum flow 180 l/min
• Rated flow 25 … 75 l/min (Δp = 10 bar)

These specialized C-clamps feature a hinged pad designed to be permanently attached to a fixture, enabling them to swing out of the way for easy loading of workpieces. The hinged mounting pad is securely fastened to the fixture using two socket-head cap screws. A four-prong knob offers a solid grip for tasks that demand rapid tightening and high torque. The clamping screw is firmly cast into the knob and includes a removable swivel foot. These clamps are offered in four different sizes

Directional control valves, direct operated, with electrical position feedback and  integrated electronics (OBE) Type 4WRPEH

• Size 10
• Component series 3X
• Maximum operating pressure 350 bar
• Rated flow 50 … 100 l/min
• Digital interface, IO link for I4.0

Directional control valves, direct operated with electrical position feedback and integrated field bus (IFB Multi-Ethernet) Type 4WRPF

• Sizes 6 and 10
• Component series 3X
• Maximum operating pressure 350 bar
• Rated flow 8, 18, 32, 50, 80 l/min (∆p = 5 bar)

Carr Lane drill-press toggle clamps are perfect for use on drill presses, featuring an adaptor base designed for slotted tables and a quick-adjusting spindle. The open arm allows for easy adjustment of the spindle position. It comes with two quick-adjusting flat-cushion spindles—one short and one long. Select the T-Nut size that matches your table slot (3/8, 7/16, 1/2, 9/16, 5/8, 10mm, 12mm, 14mm, or 16mm), and choose from inch or metric threads (5/16-18, 3/8-16, M8, or M10). It is also available without a T-Nut for use with tapped jig plates.

• Vertical T Handle or Horizontal Handle
• Mounting Screw Size - 5/16-18 or 3/8-16

Directional control valve, pilot-operated, with electrical position feedback and integrated electronics (OBE) Type 4WRDE

• Size 10 … 27
• Component series 6X
• Maximum operating pressure 350 bar
• Rated flow 25 … 500 ml/min

Carr Lane’s custom hammers and industrial hand tools are built to fulfil any tooling requirement. These customisable hammers are available in various sizes, by choosing the hammer inserts that best fit your specific application. Carr Lane’s custom hammers are available in a range of handle materials, such as wood, fiberglass, and steel. Carr Lane’s no-rebound hammers, also known as dead blow hammers, provide maximum impact and deliver 50% more force than standard hammers. Their design features specialized steel pellets that transfer momentum directly to the impact point.

Directional control valve, direct operated, with integrated field bus (IFB-Multi-Ethernet) Type 4WRPFH

• Size 6
• Component series 3X
• Maximum operating pressure 350 bar
• Rated flow 40 l/min (∆p = 35 bar)

Carr Lane’s custom hammers and industrial hand tools are built to fulfil any tooling requirement. These customisable hammers are available in various sizes, by choosing the hammer inserts that best fit your specific application. Carr Lane’s custom hammers are available in a range of handle materials, such as wood, fiberglass, and steel. Carr Lane’s no-rebound hammers, also known as dead blow hammers, provide maximum impact and deliver 50% more force than standard hammers. Their design features specialized steel pellets that transfer momentum directly to the impact point.