Home

• Hose Lengths: 1 - 30 metres
• Hose Reel & Stand: 30 - 270 metres
• Maximum Operating Pressure: 1500 bar

The SFM-Series offer an economical solution for basic multi-point simultaneous lifting applications and enables a single operator to control a maximum of 4 lifting points from one manifold. 

• Inlet Connection: 1x power pump
• Outlet Connections: Max. 4 cylinders
• Minimum Pump Flow Required: 1,40 l/min
• Maximum Operating Pressure: 700 bar

• Capacity: 10 - 200 tons
• Maximum Daylight and Width: 54.50 & 48.00 inches
• Maximum Operating Pressure: 10,000 psi

MLS-Series Machine Skates offer easy and stable movement across various floor types.

• Capacity (Individual Skates): 3 - 32 ton (29 - 314 kN)
• Height: 110 - 180 mm

Hydraulic Gantries are a safe, efficient way to lift and position heavy loads in applications where traditional cranes will not fit and permanent overhead structures are not an option. 

• Capacity (with 4 legs): 400 - 10.484 kN
• Lifting Height: 3,0 - 12,0 meters 

Battery-powered, remote controlled, heavy-duty machine moving system for clean and even surfaces

• Capacity (Set with Dual Follower Skate): 100 - 300 - 500 kN
• Transport Speed (loaded): 8 m/min
• Power Source: 24 Volt Battery 

Skid tracks used for levelling and load distribution to reduce ground bearing pressure. Available in two standard lengths. 

• Required to support and level gantry
• Smoother travel, better load distribution
• Includes lifting eyes and/or fork pockets

Electric propulsion controlled by standard gantry controls

• Used to shift load along header beam 
• Each side-shift contains an electric drive
• Utilizes existing gantry wireless control
• Set of four includes sturdy transport frame

Enerpac strand jacks are the strand jacks of choice for customers seeking precise synchronous control with heavy-lifting capacity in an economical, compact, and reliable foot print.

• Capacity: 15 - 850 ton
• Stroke: 250 - 480 mm
• Maximum Operating Pressure: 135 - 350 bar

Enerpac offers a comprehensive range of hydraulic power packs that are optimized for use with their industry leading heavy lifting strand jacks.

• Motor Size: 2,2 - 30 kW
• Maximum Operating Pressure: 230 - 350 bar
• Reservoir Capacity: 20 - 350 litres
• Flow at Rate Pressure: 3,5 - 43,0 l/min 

The jack up-system is a custom developed multi-point lifting system. A typical system setup includes four jack-up units positioned under each corner of a load.

• Capacity Per Lifting Tower: 250 - 500 ton
• Lifting Height: 10 - 15 metres

Easy-to-use, compact and portable jacking system that utilizes base lifting frames and self-aligning, lightweight steel cribbing blocks, instead of wooden cribbing materials.

• Capacity Per Cube Jack: 500 - 1000 kN
• Maximum Lifting Height: 2067 - 3006 mm
• Maximum Operating Pressure: 700 bar