Home

VFC-series flow control valves provide repeatable oil flow control

• Maximum Oil Flow: 38 l/min
• Pressure Range: 0-350 bar

Carr Lane Liner bushings are permanently installed bushings used to hold renewable drill bushings. The inner diameter of the liner has an exact sliding tolerance with the outer diameter of the replaceable bushing. This arrangement ensures the correct positioning of the replaceable bushing and shields the jig plate from damage and wear caused by regular bushing changes. The "length" specified for an HL bushing refers to its total length, not the portion beneath the head. These are available in both ground and unground options available.

• OD - 1/2 - 2-3/4
• ID RANGE - 5/16 - 2-1/4
• Imperial sizes with a variety of lengths and unground options available

Carr Lane Spring Plungers are self-contained devices that combine a plunger and spring to deliver force across a wide range of movement. Featuring a sliding plunger nose with an extended bearing length, these plungers ensure smooth, consistent operation. Available in various options, including steel, stainless steel, and combinations of stainless steel or steel with a Delrin nose.

• Light and Heavy Force
• Metric and Imperial sizes available
• Thread - #6-32 - 1"-8 or M6 - M12
• Standard and Delrin® with Steel and Stainless Steel options

Palm-grip hand knobs come equipped with a full grip and fluted edge. Offered in two sizes, each available in blank, tapped, or reamed configurations. Tapped-hole sizes range from 3/8-16 to 5/8-11 (M10 to M16 metric), while reamed-hole sizes range from 3/8" to 5/8" (10mm to 16mm metric).

• External Diameter: 2-3/4 - 3-1/8
• Blank, Tapped and Reamed Holes

Carr Lane’s floating locating pins provide precise location in one particular axis while allowing considerable float in the correlating perpendicular axis. Typically used along with a Round Pin to locate two machined holes in a workpiece or to align two fixture components without causing binding.  Chamfered tip especially manufactured for easy part loading. These pins are function in a manner similar to Diamond Pins, except they allow greater variation in hole spacing. Floating locating pins are available in pin diameters 1/4, 5/16, 3/8, 1/2, and 5/8".

Enerpac VM, VE-Series pump mounted directional control valves offer reliable control of single and double-acting cylinders and tools

• Flow Capacity max: 17 l/min
• Max. Pressure: 700 bar

The FSH, FSM-Series parallel wedge spreader offer controlled separation without bending or risk of slipping from the joint. These spreaders are ideally suited to flanged joint applications

• Maximum Operating Pressure: 700 bar
• Tip Clearance: 6 mm
• Maximum Spread: 80 mm
• Maximum Spread Force: 8-14 ton

Enerpac PGM Series, gasoline powered hydraulic pumps come fitted with a four-cycle Honda motor 2,2 kW

• Maximum Pressure: 700 bar
• Oil Capacity: 4 - 8 litres
• Motor Size: 2,2 kW
• Flow at Rated Pressure: 0,66 l/min

Enerpac XC-Series cordless hydraulic pumps offer the performance of a powered pump with the portability of a hand pump

• Maximum Pressure: 700 bar
• Flow at Rated Pressure: 0,25 l/min
• Oil Capacity: 1-2 litres
• Valve Function: 3/2-valves for single-acting cylinders or tools*

*For 4/3 valves for double acting cylinders and tools contact HYQUIP for price and delivery

Enerpac XA-series air driven hydraulic foot pumps feature an ergonomic design for less operator fatigue

• Maximum Pressure: 700 bar
• Flow at Rated Pressure: 0,25 l/min
• Air Consumption: 283 - 991 l/min
• Oil Capacity: 1 - 2 litres

The RAR-series cylinders are double-acting for rapid retraction, regardless of hose lengths or system losses

• Max Operating Pressure: 700 bar
• Cylinder Capacity (ton): 20 to 250
• Stroke (mm): 50 to 362

HYDAC "R" type return line filter elements, featuring multi-layered Betamicron® BN4HC glass fiber media, offer reliable filtration from 1 µm to 20 µm with collapse stability up to 20 bar, ensuring high contamination retention and flow efficiency in hydraulic systems operating between -30 °C and +100 °C.

Key Features:

• Filtration: 1 µm to 20 µm
• Filter Size: 30 to 2600
• Collapse stability: up to 20 bar

"R" type elements are used in return line filters, e.g. in the series RF, RFD, RFM, RFL, RFLD, RFM, NF, NFD.