Home

Bosch Rexroth high-pressure pump for applications in a closed circuit up to 530 bar

• Sizes 56 to 90
• Nominal pressure 400 bar 
• Maximum pressure 530 bar 

HC6H: 8 intensification factor

• P_IN: 20 – 207 bar (inlet pressure)
• P_H: 5,000 bar maximum (outlet pressure)
• P_RETURN: As low as possible (return pressure to tank)
• P_OUTLET: P_H = (P_IN – P_Return) I (intensification)
• Mounting: Inline tube

Carr lanes step block and clamp sets are made up from an assortment of six step block pairs and six step clamps in a wooden holder. These sets are offered in two unique load ranges, standard and heavy. These are available to fit stud sizes from 3/8-16 to 3/4-10 (M10 to M20 in metric).

• OD - 4mm - 125mm
• ID RANGE - .35 - 95.00mm
• Metric sizes available with a variety of Lengths

The precision height locator features a counterbored hole for mounting with a socket-head cap screw (sold separately). Jig Rest Buttons are ideal for use as supports, side locator pads, and jig feet. These buttons can also be stacked to reach greater heights. They are available in outside diameters ranging from 1/2 to 1-1/4", with various height options to choose from.

• Metric and Imperial sizes
• Steel Black Oxide Finish

Carr Lane offer a choice of two hub sizes. A single hub offers a hole for a singular lever bar. A triple lever bar hub offers three holes for 3 different lever bars to be inserted into Single and triple. Both designed with a reamed centre hole. Manufactured using stainless steel and well-polished finish. Lever bars and knobs to be ordered separately.

• Thread: 5/16-18 - 3/8-16
• Reamed and Tapped holes

Available in Stainless Steel, Lifting Pins are a single-acting ball lock pin with a solid, one-piece body and four balls for high tensions loads

• Shank Diameter - 1/4 - 1
• Grip Length - .25 - 3.00
• Load Capacity - 120 - 2900 lbs

• Equal Cross Coupling 
• DIN 2353 / ISO 8434-1
• For use with Hydraulic Metric Seamless Carbon Steel Tube
• L Light Series from 6mm to 42mm OD
• S Heavy Series from 6mm to 38mm OD
• Pressure 100 bar to 630 bar, Subject to Series and Pipe Size! 
• Zinc Plated with Trivalent Passivation
• Supplied with Tube Nut & Olive (Cutting Ring/Ferrule)

The HYDAC Fluid Control Unit FCU 1000 Series is a portable service unit designed for short-term, on-site monitoring of particle contamination and water saturation in hydraulic systems. With accurate, real-time analysis and robust design, it’s ideal for field service, maintenance, and diagnostics of mobile hydraulic systems.

Key Features:

• Ambient temperature range: 0 ... +45 °C / 32 ... 113 °F
• Storage temperature range: -40 ... +80 °C / -40 ... 176 °F
• Pressure max. 345 bar / 5000 psi

The HYDAC HDA 4700 Electronic Pressure Transmitter features a highly accurate thin-film strain gauge on a stainless steel membrane, delivering reliable pressure measurement in compact spaces. With output options of 4–20 mA or 0–10 V, it integrates seamlessly into HYDAC and standard control systems.

Key Features:

• High accuracy (≤ ±0.25% FS) and low temperature error
• Compact, robust design for tight spaces
• Excellent EMC performance

HYDAC Inline Filter LFN, designed in accordance with DIN 24550, provides efficient hydraulic filtration with flow rates up to 100 l/min and pressure levels up to 100 bar. Featuring a screw-in filter bowl, clogging indicator connection, and compatibility with various hydraulic fluids, it ensures reliable system performance and contaminant control.

Key Features:

• Flow rates up to 100 l/min
• Pressure levels up to 100 bar
• Connections: G½ to G1

The HYDAC Inline Duplex Filter RFLD is engineered for continuous-duty hydraulic and lubrication systems, featuring a robust ball changeover valve that allows uninterrupted operation during element replacement. With flow rates up to 2,500 l/min and pressure ratings up to 64 bar, it ensures reliable, high-capacity filtration in demanding environments.

Key Features:

• Flow Rates up to 2,500 l/min
• Pressure Range, 16 / 25 / 40 / 64 bar
• Temperature Range -10°C to +100°C