Carr Lane Flat Milled Renewable Bushings 1/2 OD
- OD - 1/2"
- ID RANGE - .1405 - .3438"
- Imperial sizes with a variety of lengths
£0.00
£0.00 Inc. VAT
Home
Categories
Showing 361 to 372 of 1933 items
Enerpac BHP-Series Grip Puller Sets
BHP-Series grip puller sets precise hydraulic control allows fast, efficient and safe pulling
- Capacity: 8,20,30 and 50 ton
- Reach: 252 - 700 mm
- Spread: 249 - 1100 mm
- Max. Pressure: 700 bar
£2,817.00
£3,380.40 Inc. VAT
Carr Lane Slip/Fixed Renewable Bushings 1/4 OD
- OD - 1/4"
- ID RANGE - .0995 - .1405"
- Imperial sizes with a variety of lengths.
£25.59
£30.71 Inc. VAT
Enerpac A, C, F, T-Series Hydraulic Couplers
A, C, F, T-Series hydraulic couplers provide quick connection of hydraulic lines
- Max. Flow: 6,1 - 40,0 l/min
- Thread: 1/4" - 3/8" NPTF
- Max. Pressure: 700 and 800 bar
£25.71
£30.85 Inc. VAT
Carr Lane Serrated Press Fit Metric Bushings
- OD - 5mm - 26mm
- ID RANGE - 1.00mm - 18.00mm
- Metric sizes available with a variety of Lengths
£14.73
£17.68 Inc. VAT
Carr Lane Head Press Fit Bushings 13/64 OD
- OD - 13/64"
- ID RANGE - .0135 - .0995"
- Imperial sizes available with a variety of Lengths
£24.11
£28.93 Inc. VAT
Enerpac AM-Series Split-Flow Manifolds
AM-Series premounted split-flow manifolds control two or four single-acting cylinders or tools simultaneously
- Oil port connection: 3/8" NPTF
- Number of oil ports: 5 or 7
- Maximum pressure: 700 bar
£532.00
£638.40 Inc. VAT
Carr Lane Press Fit Bushings 3/16 OD
Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.
- OD - 3/16"
- ID RANGE - .0512 - .0995"
- Imperial sizes available with a variety of Lengths
£18.62
£22.34 Inc. VAT
Enerpac JH, JHA-Series Aluminium and Steel Jacks
Enerpac aluminum and steel lifting jacks have a capacity of 7 to 150 tons
- Stroke: 76 - 155 mm
- Max. Pressure: 700 bar
£1,237.00
£1,484.40 Inc. VAT
PGH Series 2X Size 5 to 16
PGF hydraulic pumps are leak gap-compensated internal gear pumps with a fixed displacement
- Frame size 2, 3
- Size 5 ... 16
- Component series 2X
- Maximum operating pressure 350 bar
- Maximum displacement 5.2 ... 16 cm³
£1,168.58
£1,402.30 Inc. VAT
ZDR 10 D Size 10 Series 5x
Cetop 5 pressure reducing direct operated sandwich valves ZDR 10 D
- Nominal size 10
- Component series 5X
- Maximum operating pressure 350 bar
- Maximum flow 160 l/min
£562.35
£674.82 Inc. VAT
Carr Lane Round and Diamond Pins
These precision locating pins feature a chamfered tip for effortless part loading and a shoulder that helps resist downward forces. Typically, one Round Pin and one Diamond Pin are used together to locate two machined holes in a workpiece or to align two fixture components without causing binding. The head and shank diameters of the round locating pins are concentric to within .0005" TIR. These pins are available with head diameters ranging from 1/4" to 1" (6 to 20mm in metric).
- Head Diameter: 1/4 - 1 or 6mm - 20mm
- Metric and Imperial sizes
- Round and Diamond pins
£5.18
£6.22 Inc. VAT
Showing 361 to 372 of 1933 items
Hyquip Engineering Services
Our team have over 35 years in the business, and experience in many industrial sectors. From design and project management, to refurbishment and repair, they can provide the solutions you need.