Home

MV-Series pilot operated check valves hold cylinder load and ensure remote unlocking

• Pilot ratio: 7:1
• Flow: 38 l/min

Carr Lane Side-Pull Hoist Rings are designed for side mounting applications. These Side-pull hoist rings enable the rotation and repositioning of loads without needing to detach them, by using a spreader bar. The lifting ring on these hoist rings can rotate 360° and pivot 180°, providing versatile lifting from any angle. Standard versions of the Carr Lane Side-Pull Hoist Rings feature inch threads with load capacities up to 2,500 lbs or metric threads with capacities up to 3,500 lbs. The Heavy-Duty Hoist Rings in this section offer inch threads with capacities up to 10,000 lbs. or metric threads with capacities up to 9,200 lbs. These are available in both triangular ring and D ring variations.

• Load Rating: 650 - 55'000 (lbs)
• Installation Torque: 3.5 - 3000 (lbs)

Heavy-Duty Swivel Hoist Rings are built with a forged lifting ring and a simplified design for easy disassembly. These hoist rings can pivot 180° and swivel 360° simultaneously, enabling lifting from any direction. They are available with both inch and metric threads, offering load capacities up to 30,000 lbs, with many options featuring different bolt lengths. For sizes up to 10,000 lbs, a long ring option is available, providing added reach and compatibility with larger lifting hooks.

• Load Rating: 550 - 30,000 (lbs)
• Installation Torque: 5 - 1100 (lbs)
• Safety Factor = 5.1

Carr Lane Lock screws can be used on either the "slip" side or the "fixed" side of a slip/fixed renewable bushing. Lockscrews are the most popular locking device for renewable drill bushings. These Lockscrews are designed and manufactured to be simple, strong, compact, and economical. Carr Lane lockscrews are available in a wide variety of sizes to accommodate renewable bushings ranging from 3/16" to 5" body diameter. TW series also available for thin-wall bushings. These Lockscrews are now only available in packs of 5.

• Available in metric and imperial sizes
• Only available in packs of 5

Carr Lane hand knobs are designed to provide an efficient and ergonomic method of manually adjusting and controlling machinery and applications HYQUIP supply the full range of Carr Lane Knobs including Star, Hand and Fluted, available in a variety of materials and sizes.

• Star, Hand and Fluted Knob designs
• Metric and Imperial sizes
• Thread: #10-32 - 5/8-11 or M6 - M12

Carr Lane double acting ball lock pins are available with three different handle variants including: Ring handle, T handle and L handle. Ball Lock Pins are high-strength, quick-release alignment pins with a precision ground shank and positive locking. Ball Lock Pins are high-strength, quick-release alignment pins with a precision ground shank and positive locking. These pins are available in pin diameters from 3/16 to 1" (5 to 20mm in metric). . If you wish to configure your own double acting ball lock pins do not hesitate to contact our sales team.

• T Handle, L Handle, Ring Handle
• Nominal Shank Diameter - 3/16 - 1"
• Grip Length (") - 1.00-5.00

The sliding bar can be adjusted to any desired position for easy tightening, and it stays securely in place with a gentle spring pressure. These screw clamps are compatible with all standard swivel feet. They come in body-thread sizes ranging from 5/16-18 to 5/8-11 (M8 to M16 metric) and are offered in various lengths. Available in both steel and stainless steel options.

• Metric and Imperial sizes
• Thread: 5/16-18 - 5/8-11 or M8 - M16
• Steel and Stainless Steel options

ROEMHELD M4.202 Lifting Modules are used as a base unit of devices for controlled lifting and lowering of loads or for height adjustment only

• Max. lifting force: 1000 / 2000 N
• Max. bending moment: 500 Nm
• Stroke: 300 to 1000 mm
• Pump strokes per 100 mm 2.2 - 3.5
• Lifting speed: 14 - 34 mm/s
• Control voltage: 24 VDC
• Supply voltage: 230 VAC

T-handle knobs are designed to offer optimal leverage for strong clamping pressure. Made from phenolic plastic, they feature a durable smooth and glossy surface. the integrated brass insert ensures enhances thread durability. Available in one knob size, with both metric and imperial tapped hole size. Imperial sizes range from 1/4-20 to 38-1, while the metric sizes range from M8 to M10.

• Metric and Imperial sizes
• Thread: 1/4-20 - 3/8-24 or M6 - M10

Thinwall Key Inserts have a smaller OD thread size than standard heavy-duty inserts, ideal for tight spaces where less pull-out strength is acceptable

Enerpac H700-Series high pressure hydraulic hoses; thermo-plastic hoses for demanding applications and heavy duty rubber hoses with rubber coating

• Available Hose lengths: 0,6 - 15 m
• Maximum working pressure: 700 bar
• Available Internal diameters: 6.4 - 9,7 mm