Home

MHV, HV, PLV & V-Series, Accessory valves regulate oil flow or system pressure. All accessory valves feature NPT or SAE porting to insure against leakage at rated pressure

Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.

• OD - 1/4"
• ID RANGE - .0980 - .1406"
• Imperial sizes available with a variety of Lengths

Enerpac hydraulic Machine Lifts are ideal for lifting heavy equipment with minimum available access

• Lifting Capacity: 8,5 - 20 ton
• Stroke: 136 - 157 mm
• Toe Clearance: 20 mm
• Max. Pressure: 700 bar

Enerpac cylinder attachments for BRD-series cylinder mounting flexibility

• Capacity: 4 - 23 ton

BHP-series bearing pullers are easily adapted to cross bearing pullers for fast and efficient removal of the most difficult parts

• Capacity: 8, 20, 30, 50 ton
• Spread Range: 9 - 292 mm
• Width Range: 126 - 264 mm

The heavy-duty levelling assembly consists of a radius-head screw, a tapped plate, and a hex nut, designed for durability and reliable performance. It is available in a wide range of thread sizes, from 3/8"-16 to 1"-8, as well as metric options ranging from M10 to M24, ensuring compatibility with various applications and needs.

• Thread: 3/8-16 - 1-8 or M10 - M24
• Metric and Imperial sizes
• Mild Steel, Black Oxide Finish

Carr Lane Marine ball lock pins are available in three variations including: button handle, recessed button handle and ring handle. This range is only available in stainless steel to provide extra protection from corrosion in marine environments. Ball lock pins are high-strength, quick-release alignment pins with a precision ground shank. These are available in pin diameters from 3/16 to 3/4" (5 to 16mm in metric).Pins with special grip lengths up to 12” (300mm) and other special features can be made to order.  If you wish to configure your own marine ball lock pins do not hesitate to contact our sales team.

• Choice of three handle styles: Buttons, Recessed Button and Ring
• Shank diameters from 3/16 to 3/4” (5 to 16mm in metric), each available in a choice of several standard grip lengths
• Available from stock only in the standard grip lengths listed below (other grip length available as specials)

The innovative grooved-bar design operates efficiently and securely – simply push the bar forward to engage the workpiece, then rotate clockwise to apply pressure. To release, turn anti-clockwise and slide the bar back. The Sliding handle can be moved to any position to provide optimal leverage. It delivers the same strength as a traditional screw clamp but with significantly faster operation. Available with both sliding-bar handle and knob handle variations.

• Sliding and Knob Handles
• Thread: 3/4-10 - 1-1/8-7

MG and MA spin-on filter cartridges are used in mobile filters of the MF and MFD series, in addition to breather filters of the BL series

• Size: 0080, 0160, 0180
• Operating pressure: 8 bar

HYDAC MG/MA Spin-on Filter Elements, available in sizes 0080, 0160, and 0180, feature durable Betamicron® or paper media with filtration ratings from 3 µm to 20 µm, and are designed for use in MF, MFD, and BL series filters, providing reliable performance up to 8 bar with easy, clean element replacement via ISO 228 (MG) or UN thread (MA) spin-on cartridges.

Quick-acting four-prong knob that slides in and out of clamping position, ideal when the knob must be completely removed for loading

• Metric and Imperial sizes
• Thread - 1/4-20 - 5/8-11 OR M6 - M16

Carr lane key insert installation tools significantly streamline the Key Insert insertion process and makes installing key inserts effortless. These tools are offered in various sizes to cater for different key insert dimensions to ensure a perfect fit and installation for applications. Use the datasheet below to find the installation tool that best fits your application needs.