Carr Lane Lockscrews

L Pins and T Pins have precision-ground pin diameter to ensure accurate hole alignment. L Pins and T Pins are removable locating pins with a durable construction, each featuring a handle end with a small hole for attaching an optional cable. These pins come in a variety of diameters and lengths. Jig Pins, similar to L and T Pins, incorporate an integral shoulder to keep the handle raised.  Also available from the Carr Lane range, locking L Pins and T Pins with a lock screw that securely holds bushings in place. These pins are available in both imperial and metric sizes.

• Available in Imperial and Metric sizes.

Carr Lane locking-pin bushings are compatible with Locking L Pins, Locking T Pins and Locking Clamping Pins. They are equipped with a retainer spring clip on the inside diameter, and is compatible with all types of locking pins and locating screws. These precision bushings are designed to be press-fitted into a standard reamed hole and can be securely fastened with a lock screw to ensure the bushing remains in place.

• Available in Metric and Imperial sizes
• Available in sizes from 3/16" - 1/2" (6mm-12mm)

Carr Lane Head Press Fit Bushings are a variation of standard press fit bushings, featuring a head designed to withstand significant axial loads. These bushings are permanently installed into the jig plate and are typically used for single-operation drilling or reaming, where the bushings are not intended to be replaced throughout the tooling's lifespan. The head of these bushings can either remain exposed or be recessed by counterboring the installation hole.

• OD - 1-3/4"
• ID RANGE - 1.0000 - 1.3906"
• Imperial sizes available with a variety of Lengths

A precision locating pin is commonly used with a matching bushing to align two parts of a fixture. The pin’s head and shank diameters are concentric within .0005" TIR. Available in pin diameters of 1/4", 5/16", 3/8", and 1/2" (6mm, 8mm, 10mm, and 12mm in metric). A precision bushing is used with a Bullet-Nose Dowel to align two components of a fixture. The bushing’s ID and OD are concentric within .0003" TIR. Available for pin diameters of 1/4", 5/16", 3/8", and 1/2" (6mm, 8mm, 10mm, and 12mm in metric).

• Imperial and Metric
• A Diameter - 1/4 - 1/2  6mm - 12mm
• B Diameter - 1/4 - 1/2  6mm - 12mm

Carr Lane hand knobs are designed to provide an efficient and ergonomic method of manually adjusting and controlling machinery and applications HYQUIP supply the full range of Carr Lane Knobs including Star, Hand and Fluted, available in a variety of materials and sizes.

• Star, Hand and Fluted Knob designs
• Metric and Imperial sizes
• Thread: #10-32 - 5/8-11 or M6 - M12

Carr Lane offer various types of washers including flat washers, spherical washers and knurled face washers. Flat washers have a serrated surface designed to stop two parts from slipping relative to one another. Spherical Washers are robust two-piece washers designed to adjust when a stud and clamping surface are not perfectly perpendicular. These items are available in metric and imperial sizing as well as steel and stainless-steel options for selected products.

• Available in metric and imperial
• Available in steel and stainless steel

 Carr lane offer a range of knurled check nuts , knurled nuts and acorn nuts. Knurled check nuts are versatile lock nuts designed for easy finger tightening. Available in thread sizes ranging from #10-32 to 5/8-11 (M5 to M16 in metric).  Knurled nuts are robust lock nuts that can be tightened by hand or with a 1/4" or 6mm diameter extension rod. Features a large contact surface. Available in thread sizes from 1/4-20 to 5/8-11 (M6 to M16 in metric). Made in the USA. Acorn nuts are used to cover the end of a stud, preventing snagging and protecting the threads. Available in thread sizes from 1/4-20 to 3/4-10 (M6 to M20 in metric).

• All available in Metric and Imperial sizes

Locking Clamping Pins are available as Complete Assembly, Pin Only and Bushing Only, similar to clamping pins except the pin is positively retained in the bushing. In its retracted position, the bushing's spring clip clips into the pin's radial groove. This prevents removal by using spring force to hold the pin in a fully retracted position. Depending on extended screw length, these threaded alignment pins can be used for clamping and locating, or clamping only. The clamping bushing is made separate from the pin, and is required to be welded in place at the proper length to fit the application.  These are available in thread sizes from #10-32 to 1/2-13 (M6 to M12 in metric)