Home

• OD - 3/4"
• ID RANGE - .2812 - .5625"
• Imperial sizes with a variety of lengths

Carr Lane Head Press Fit Bushings are a variation of standard press fit bushings, featuring a head designed to withstand significant axial loads. These bushings are permanently installed into the jig plate and are typically used for single-operation drilling or reaming, where the bushings are not intended to be replaced throughout the tooling's lifespan. The head of these bushings can either remain exposed or be recessed by counterboring the installation hole.

• OD - 9/16"
• ID RANGE - .2950 - .3445"
• Imperial sizes available with a variety of Lengths

• OD - 1/2"
• ID RANGE - .1875 - .3750"
• Imperial sizes available with a variety of Lengths

Durable swivel head screw designed to accommodate various swivel feet. The knurled head ensures a secure grip, allowing for easy hand tightening in light clamping tasks. Knurled-head swivel-screw assemblies that combine the bodies and feet also in this category, available in multiple sizes and materials. Swivel head screws are available in four different variants, which includes small foot, large foot, ball foot, and bodies for swivel had screws. These are available in steel, stainless steel and steel with black oxide finish.

• Thread: 1/4-20 - 5/8-11 or M6 - M16
• Metric and Imperial sizes
• Steel, Steel Black Oxide Finish and Stainless Steel

A precision pad for securing a Construction Ball. These pads must be attached using two socket-head cap screws, and dowels should be added to ensure precise positioning. To secure the Construction Ball, install a setscrew (not included) in the crosshole. Available in a 1-inch size and two metric options, made from steel or stainless steel, designed to fit Construction Balls with various shank diameters. round and rectangular pad designs available.

• Round and rectangular designs available
• Available in Metric and Imperial

A precision swivel ball that functions as both a contact bolt and a rest pad. When used as contact bolts, these swivel-ball units are perfect for distributing clamping pressure evenly on sloped or uneven surfaces. As rest pads, they are precision-ground on both the top and bottom for precise height positioning, even on sloped surfaces. Featuring a 20° total swivel angle, these are available in thread sizes ranging from 5/16-18 to 5/8-11.

An effective tool used during the installation of Ball Plungers or Spring Plungers to make the process more efficient. Preferable to  a screwdriver on the ball/nose end, due to the clearance hole in the centre preventing the over-compression of the plunger's internal spring. Available in sizes to accommodate all Ball Plungers and Spring Plungers from #4-48 to 1"-8 (M4 to M12 in metric).

• Available in metric and Imperial sizing
• Sizes from #4-48 to 1”-8 (M4 to M12 in metric)

Removable locating pins with a straight handle, precision-ground for accurate hole alignment. The pin body is inset into a solid handle and silver-soldered for a durable construction. The handle features a small hole for attaching an optional cable. Available in pin diameters ranging from 1/4" to 1/2" (6 to 12mm metric). 

• Available in sizes from 1/4" to 1/2" (6 to 12mm metric).
• Available in Metric and Imperial

CLRG-series high tonnage cylinders are double-acting, for positive retraction

• Maximum Operating Pressure: 700 bar
• Cylinder Capacity (ton): 50 ton to 1000
• Stroke (mm): 50 to 300

CLRG type cylinders above 150 Ton, are Price on Request

The HYDAC Offline Filter OLF 15/30/45/60 series is a robust filtration unit designed for stationary hydraulic and lubrication systems with large fluid volumes. It features high contamination retention capacity, extended service life, and easy maintenance, making it ideal for applications like machine tools and plastic injection machines.

Key Features:

• Content of the housing: max 78 l
• Operating pressure: max. 6 bar
• Optional sensors: Available sensors to monitor contamination and water levels in the oil

The HYDAC WTK Water Test Kit is a fast, portable solution for determining water content in mineral and lubricating oils, using a pressure-based chemical reaction for precise readings. Housed in a lightweight, impact-resistant case, it delivers accurate results within minutes, making it ideal for both field and lab use.

Key Features:

• Selectable measurement range: 0.02–1%, 0–10%, or 100–3000 ppm
• Quick testing: Results in approx. 2 minutes (excluding prep)
• Durable, portable design with illuminated multilingual display and replaceable battery

The HYDAC ETS 3200 Pressure-Resistant model is a compact electronic temperature switch with a 4-digit display, designed for inline or hydraulic block mounting. With a robust 600 bar pressure rating and an integrated 18 mm probe, it offers reliable temperature monitoring, dual switching outputs, and selectable analog output for versatile applications.

Key Features:

• Probe length: 18 mm
• Pressure resistance: 600 bar
• Measuring range: -25 .. 100 °C (-13 ... 212 °F)