Home

ROEMHELD B1.854 Swing Clamps with Sturdy Swing Mechanism: Bottom flange type, with optional position monitoring, double acting

• Maximum operating pressure 350 bar
• Maximum clamping force: 6 - 22 kN
• Rod diameter: 16 - 32 mm
• Piston diameter: 23 - 45 mm
• Maximum flow rate: 10 - 57 cm³/s

This hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The favourable area ratio (piston/piston rod) allows high clamping forces already at relatively low oil pressures. Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading or unloading. 

ROEMHELD B1.8271 Mini Compact Clamp: Cartridge type, clamping force 1.3 kN double acting, max. operating pressure 200 bar

• Clamping force 1.3 kN
• Maximum operating pressure 200 bar
• Clamping force at 200 bar: 1.3 kN
• Usable clamping stroke: 5 mm
• Adm. flow rate 5 cm³/s
• Minimum pressure 20 bar

The hydraulic mini compact clamp is a double acting pull-type cylinder where a part of the linear stroke is used to swing the clamping lever onto the workpiece. In order to minimise the dimensions, the usual flange for screw fixing is omitted.

ROEMHELD B1.553 Compact, Double-Acting Short-Stroke Cylinder with very high press and pulling force and adjustable control of the piston position by magnetic sensors.

• Maximum operating pressure 500 bar
• Piston diameter 25 - 63 mm
• Rod diameter 16 - 40 mm
• Stroke 20 - 100 mm
• Maximum push force 24.5 - 155.9 kN

ROEMHELD B1.464 Threaded Body Cylinder: short stroke, single acting with spring return

• Operating pressure 500 bar maximum
• Piston diameter ranges from 20 to 32 mm
• Stroke Options are 4 and 8 mm 
• Clamping Force at 500 bar (5.7 - 40.2 kN)
• M38 - M56 external threads

These short threaded-body cylinders are particularly suitable for recessed installation in clamping bars (see datasheet). Oil supply is made through drilled channels. The plunger construction combined with the wiper avoids penetration of contamination and liquids into the spring area.

Enerpac LGM-Series, Lock-Grip Pullers ensure a secure, safe and easy operation due to the 'Lock-on jaws'.

• Capacity: 3 - 13 ton
• Max. Reach: 102 - 215 mm
• Spread Range: 132 - 300 mm

Pressure reducing sandwich plate pilot operated valve Z3DR 6 V

• Size 6
• Component series 1X
• Maximum operating pressure 350 bar
• Maximum flow 60 l/min

Wagon Brakes with glow in the dark handle, for use on stage-set designs and other mobile jigs and carts, available in two sizes

• Adm. retaining force: 25 - 120 kN
• Cylinder diameter: 35 - 85 mm
• Clamping stroke: 14 - 19 mm
• Temperature resistance: up to 80°C (on request: up to 250 °C)

ROEMHELD ZH Concentric Vices with flexible use and opening stroke limitation

Max. Clamping Force:

• Z 100 H: 16 kN at 150 bar
• Z 125 H: 25 kN at 150 bar
• Z 160 H: 40 kN at 150 bar

ROEMHELD B1.828 Compact Clamps: Manifold-mounting type, pneumatic position monitoring optional, double acting

• Maximum operating pressure 250 bar
• Maximum clamping force: 2.5 - 10.5 kN
• Usable clamping stroke: 4.5 - 8.5 mm
• Adm. flow rate 4 - 25 cm³/s

The hydraulic compact clamp is a doubleacting pull-type cylinder where a part of the linear stroke is used to swing the clamping lever onto the workpiece.

Carr Lane Tapped-Heel Clamp Straps feature a radius nose for secure workpiece contact. These clamp straps are designed with a tapped heel that accommodates a clamping screw or adjustable rear support. To clamp using the clamping screw, simply tighten the screw. To clamp with the rear support, tighten the centre nut. Available to accommodate stud sizes ranging from #10-32 to 3/8-16, each in a choice of strap lengths. This clamp strap can be ordered individually, or in a complete clamp assembly. The available assemblies are assembly with knurled-head screw, assembly with clamp rest and assembly with levelling foot.

• Available in Steel and Stainless Steel
• Metric and Imperial sizes
• Range of threads and threads

 Carr Lane Diamond-Groove Bushings are manufactured for cast-in-place or potted setups. Their diamond-knurled outer diameter offers superior grip, resisting both rotational and axial forces effectively. As the outer diameter is not ground, it’s essential to precisely position the inner diameter during casting or potting to ensure the completed tool’s accuracy.

• OD - 1"
• ID RANGE - .5000 - .7656"
• Imperial sizes with a variety of lengths